The Treatment Of Physician Assisted Suicide - 1895 Words

There are many differences between PAS and euthanasia, let s take a look at some of them. Physician assisted suicide means that the physician makes lethal means available to the patient, that can be used when the patient chooses. PAS is also defined as a patient who died by performing the last act of suicide. Euthanasia would mean the physician takes an active role in carrying out the patient s request. For the patient to receive PAS, they would have to take the medication when they are still capable of swallowing or able to inject a lethal dosage of medication into his or herself. For the patient to receive euthanasia, the doctor would have to be the direct cause of the patient s death. Because the patient must be competent of killing his or herself for PAS, one of the fears is that the patient will feel the need to take their life at an unnecessary time so they will still be able to before they become incapable. Euthanasia may give more time for the patient to be talked out of or a ccept other options for their terminal illness before their life is taken. There is more of a chance that a mistake will be made during PAS than there is for Euthanasia because the doctor will be there the whole time and assist the patient in death him or herself. Both will have the same outcome, they are just different options for the patient. Another aspect affecting physician assisted suicide is religion. Most Christians believe that life is the most basic gift from a loving GodShow MoreRelatedThe Treatment Of Physician Assisted Suicide1025 Words   |  5 Pagesprecious hour will give the loved ones a time to say goodbye just before they die with dignity in physician assisted suicide. Terminally ill patients have the right to end their own lives using physician assisted suicide (PAS) without repercussions of laws and people with opposing opinions. According to an article from CNN.com, there are currently five states in the U.S. where physician-assisted suicide is currently legal. In order to be eligible legally for PAS the patient must have six months orRead MorePhysician Assisted Suicide : A Legal Medicine Treatment3241 Words   |  13 Pages2014 Physician Assisted Suicide Physician assisted suicide has been discussed on various occasions. You will find a lot of controversy with this topic because it s not only a matter of what the patient wants, but a matter of what s correct among the groups. Right off the bat you see that the US, Oregon, Washington and Montana have legalized the practice of physician assisted suicide. (HRF 2014) In 2013 Vermont declared suicide with prescribed medication was a legal medical treatment. Read MorePhysician Assisted Suicide Is Not A Beneficial Treatment For Medical Patients1350 Words   |  6 PagesPhysician-Assisted Suicide Imagine having a relative with a terminal illness; perhaps this person feels that their only option is assisted-suicide. Now, put yourself into their shoes. Would you choose to live the rest of your days in pain, or would you choose to die with a sense of dignity? Physician-assisted suicide has been prohibited for many years and many physicians have given their input on the subject, enlightening many on the fundamentals of assisted-suicide; others have stated their opinionsRead MoreWhat Is Physician Assisted Suicide?939 Words   |  4 PagesWhat is Physician assisted suicide? Requests to end suffering through physician assisted suicide have occurred since the beginning of medicine. This technique to end ones life is very controversial and some argue that it should be legal while others argue otherwise. There are multiple advantages and disadvantages when it comes to physician assisted suicide. In physician assisted suicide, the physician provides the necessary means to end a patient’s life, but the patient themselves performs the actRead MorePhysician Assisted Suicide, When Is It Acceptable?1709 Words   |  7 PagesPhysician-Assisted Suicide, When is it acceptable? Assisted suicide had raised issues of great importance in the society particularly the most controversial of all, the physician assisted suicide in the health care field. Since Oregon and other states implemented the legalization of physician assisted suicide, the debates continues. The U.S. Supreme Court decisions in 1997 and the Pain Relief Promotion Act of 2000 (H.R. 5544) have kept these topics on the policy of the national agenda, along withRead MorePhysician Assisted Suicide Should Be Morally Permissible1663 Words   |  7 PagesPhysician assisted suicide should be morally permissible. Patients who are in constant suffering and pain have the right to end their misery at their own discretion. This paper will explore my thesis, open the floor to counter arguments, explain my objections to the counter arguments, and finally end with my conclusion. I agree with Brock when he states that the two ethical values, self-determination and individual well-being, are the focal points for the argument of the ethical permissibility ofRead MorePhysician Assisted Suicide is NOT Ethical Essay1347 Words   |  6 PagesIs physician assisted suicide morally right? This has been a controversial subject for some time now. People are wondering whether or not it is the most humane thing to do. If dogs can be putdown, why not people? The reason is in that question. They are people. Every life is important, no matter how long it may be. Instead of finding a way to get rid of people faster, the government could put those efforts in something more positive. If other people are considering whether or not the patients’ lifeRead MoreThe Progressive Case Against Assisted Suicide1413 Words   |  6 Pagesunder physician-assisted suicide. Unfortunately, she had to relocate from California, where her friends and family lived, to Oregon in order to fall under the â€Å"Die With Dignity† act. According to euthanasia.procon.org, only four states in the whole country have leg alized assisted suicide. Unfortunately, there are many like Maynard, who have to relocate and leave their home or go through a long and strenuous court battle to receive this treatment plant. This is due to the disapproval of physician-assistedRead MorePhysician Assisted Suicide : A Controversial Subject1692 Words   |  7 PagesPhysician-assisted suicide is a controversial subject all around the world. Although it is legal in some countries and states, such as the Netherlands, Luxembourg, Switzerland, Oregon, Montana, Washington, and Vermont it is not yet legal in most (Finlay, 2011). People travel from all around the world to these locations to receive information. Physician-assisted suicide is when terminally ill and mentally capable patients perform the final act themselves after being provided with the required meansRead MoreNew Client. Professor__. English___. 2/28/17. The Implications1182 Words   |  5 Pageschoices without any external influences, a competent adult can re fuse medical treatment, even in situations where this could result in his/her death. However, when it comes to actively ending a life via euthanasia it becomes an extensively debate regarding the rights of an individual to make that choice. The article â€Å"A Doctor-Assisted Disaster for Medicine† loosely examines the negative implications of assisted suicide laws on patients. Toffler’s article sheds light upon how the law has changed the

Emma by Jane Austen - 857 Words

The story, Emma, by Jane Austen, is a riveting tale about a heroine who through her determined will to assist others, realizes and attains her own dreams and desires. The story begins with 21 year old, Emma Woodhouse struggling with the loss of her governess of 16 years and a truly dear friend, Miss Taylor. Miss Taylor recently wedded Mr. Weston and moved half a mile away from the Woodhouses residence at Hartfield. Both Emma and her father are trying to cope with this drastic change and overcome their sense of despondency. Emma feels as if she has lost her best friend and is extremely depressed about the predicament. However, Emmas distraught and lonesome manner quickly changes with the arrival of Harriet Smith. Harriet, a young†¦show more content†¦This is done using the flashback technique. Emma is uneasy about the affair at first, for she had thought that Mr. Churchill was attracted to her. However, she soon recovers from the disappointing event and finds herself a ppreciating Mr. Knightley, one of the familys oldest and dearest friends, in a way she had never perceived him before. She had always thought of him as a brother figure; a person she could have intellectual discussions with, and a person she wasnt afraid to speak her mind to. I feel that the climax occurs when Mr. Knightley pronounces his undying love for Emma, as they commit themselves to one another. Emma finally acknowledges that it was Mr. Knightley, whom she desired, the entire time; that is to say, she had an epiphany. Harriet as well, admits to herself that Mr. Martin is the only man for she ever truly loved, and they too, unite in wholly matrimony. The story is an on-going roller-coaster of love and despair; love triangles that only end, in order to embark on another. The atmosphere is a constant cycle of blissfulness and disheartenment. The plot can be compared to one of a daytime soap opera, only without all the intimateShow MoreRelatedEmma, By Jane Austen1327 Word s   |  6 PagesIn Jane Austen’s â€Å"Emma,† conversations reveal the social concerns and the character of its participants. Each contributor has a unique and therefore biased perspective that informs how they appear in a conversation. The eponymous protagonist, Emma is oft seen making judgments whether in dialogue or through free indirect discourse, such that her own shortcomings and biases are elucidated. Emma willing enters into a disagreement with her step-brother, Mr. Knightley, on the elusive Frank Churchill.Read MoreEmma by Jane Austen Essay783 Words   |  4 PagesIn Emma Jane Austen exposes the limitations of the role of women in her society. Examine Austen’s presentation of what is called in the novel, women’s usual occupations of eye, and hand, and mind. Emma – Role of Woman In Emma Jane Austen exposes the limitations of the role of women in her society. Examine Austen’s presentation of what is called in the novel, ‘women’s usual occupations of eye, and hand, and mind’. In Jane Austen’s society, the role of women was controlled by what was Read MoreEmma by Jane Austen Essay1491 Words   |  6 PagesEmma is more unpleasant than appealing. Discuss with reference to the first 9 chapters Essay: ‘Emma’ The first line of the novel ‘Emma’, by Jane Austen, claims Emma to be ‘handsome, clever, and rich’, this sums up Emma’s character completely. It is important to list these first of all, for fear of the reader to immediately dislike her. Indeed, later on-on the first page, Emma’s faults are listed, claiming her to have too much of her own way and herself thinking very highly of herselfRead MoreEssay on Emma by Jane Austen2322 Words   |  10 PagesLove Emma, by Jane Austen, is a classic comedy that took place in the nineteenth-century near London, England. Emma tells the tale of a heroine attempting to be the matchmaker for everyone, and ultimately herself. Emma Woodhouse, the main character, loses her dear friend and governess, Miss Taylor, to Miss Taylor’s marriage, in which she becomes Mrs. Weston. Emma, in search of another cherished companion, comes across Harriet Smith. Although Harriet comes from a lower class in society, Emma admiresRead MoreA Brief Note On Emma By Jane Austen Essay2070 Words   |  9 PagesTerm Paper in English 1 On Emma by Jane Austen In partial fulfillment of the requirements for Award of Degree of B.A [HONS.]ENGLISH Submitted by: Supervised by: Rashmi Priya Mrs. Suchi agarwal Amity Institute of English Studies and Research Amity University Uttar Pradesh India DECLARATION I Rashmi Priya student of B.A (Hons.) English of Amity Institute of English Studies and ResearchRead MoreWhat Is The Theme Of Emma By Jane Austen1367 Words   |  6 Pagesworldviews of a person. This is evident in Emma, as Austen uses a unique narrative style to illustrate the power of societal control. The plot of the novel focuses mainly on the theme of strategic matchmaking, however it can also serve as a catalyst to demonstrate the idea of societal authority presented in the novel. There is an emphasis on the Evangelical ideas of strength in community, and in the Lockean ideas of the social order. THESIS The theme of Emma is expressed through word games, and parallelsRead More Emma by Jane Austen Essay example2875 Words   |  12 PagesAbout the Author Jane Austen was born on December 16, 1775 at Steventon, England. She was the seventh child of the rector of the parish at Steventon, and lived with her family until they moved to Bath when her father retired in 1801. Her father, Reverend George Austen, was from Kent and attended the Tunbridge School before studying at Oxford and receiving a living as a rector at Steventon. Her mother, Cassandra Leigh Austen, was the daughter of a patrician family. Among her siblings she hadRead MoreAnalysis Of Jane Austen s Emma2163 Words   |  9 PagesJane Austen’s Emma follows the life of an overindulged, upper class young woman who, after enduring a crisis brought on by her own pride, is transformed from callow and vain, to a state of mental and emotional maturity. On first reading, the audience may perceive Emma’s actions as a repression of feelings, but upon closer inspection one can see that she is not suppressing her emotions but simply does not have the level of self-awareness that would allow her to clarify the difference between rightRead MoreLiterary Analysis Of Emma By Jane Austen1648 Words   |  7 PagesAnalysis of Emma by Jane Austen In Jane Austen’s novel, Emma, protagonist Emma avoids her own transformation by her attempts to transform others. However, Emma experiences her coming-of-age through the stable characters of those around her. Austen reveals how self-transformation is necessary in maturing and establishing self-awareness. Emma Woodhouse possesses qualities that many would envy: beauty, intelligence, wealth, and youth. However, the positive aspects of Emma are equally contrastedRead MoreJane Austen s Emma And The Passages 2175 Words   |  9 Pages2014 Emma by Jane Austen VS Benjamin Franklin Jane Austen’s novel Emma and The passages by Benjamin Franklin talk about the strong opinions their authors have on marriage. While they were both in alive and writing in different times and places, they both have differences and similarities in their opinions on what marriage means to them. My goal in this paper is to talk about those differences and similarities in opinion, by talking about the many character and relationships that are in Jane Austen

How responsible are these adults for the tragedy Essay Example For Students

How responsible are these adults for the tragedy? Essay Discuss the role of parents and parent substitutes in Romeo and Juliet. How responsible are these adults for the tragedy? I prefer to think of Romeo and Juliet as a love story with a tragic ending rather than a classic tragedy, because the love Romeo and Juliet find and share is beautiful and inspiring: there is nothing tragic about it. Juliet My bounty is as boundless as the sea, My love as deep. The more I give to thee, The more I have, for both are infinite. Their heart-rending deaths are of course tragic, resulting as they do from an unforeseeable flaw in Friar Laurences well-intentioned but unlikely plan. Their lives, however, serve to prove that young love is viable, that young people know what they want and will go to extreme lengths to find it. The fair (ie beautiful) city of Verona is a city of promise, one where young love can flourish; it is also a city where swords are drawn in an instant and where life can perish on a sword-point. In such a situation, we cannot be surprised at the existence of a smouldering feud between two prominent families (the Capulets and the Montagues) nor should we be surprised if the young people do not always follow their parents wishes. That Romeo, a Montague, and Juliet, a Capulet, should meet at all is a delightful stroke of luck or possibly fate. In a time of arranged marriages, a time when a disobedient daughter might be disowned by her angry father, the fact that Juliet falls in love with Romeo under her fathers roof creates an exciting atmosphere of romance and danger. Ironically, it is Juliets father who speaks well, and with some knowledge, of Romeo. Capulet He bears him like a portly gentleman. And, to say truth, Verona brags of him To be a virtuous and well-governed youth. Shortly before this time, Romeos own father had expressed his concern over his sons persistent melancholy, which we can dismiss as one-sided infatuation (over Rosaline). If the respective heads of the feuding houses come across initially as concerned fathers, this impression fades. Romeo is closer to Friar Laurence, in whom he is able to confide than his own father. Romeo Hence will I to my ghostly fathers cell, His help to crave and my dear hap to tell. Juliet answers to her father, treats her mother with respect but looks to her nurse for motherly advice and attention. It is fair to say that the Friar and the Nurse fulfil roles as surrogate parents, more out of situational proximity than choice. The Nurse carries out the necessary role of go-between in the early stages of the relationship and the Friar marries them. In the crisis caused by Tybalts death and Romeos banishment, the Nurse fails Juliet completely by taking the easy way out. Nurse I think it best you married with the County. O, hes a lovely gentleman! Romeos a dishclout to him. The Friar is better intentioned than the Nurse but his plans still go astray because of ill chance or fate. Fr Laurence Romeo! O, pale! Who else? What, Paris too? And steeped in blood? Ah, what an unkind hour Is guilty of this lamentable chance! It is significant that the two young people rely on people outside of their own families. In seeking love they must avoid the hatred that has become enshrined in their families feuding. Where Romeos parents are concerned but indulgent, Juliets parents are domineering and dictatorial. Over the business of her refusal to marry Paris, Juliets mother withdraws, thus leaving her husband to overrule Juliet and implement his will. .u9f3bf1165720842e566086068208753a , .u9f3bf1165720842e566086068208753a .postImageUrl , .u9f3bf1165720842e566086068208753a .centered-text-area { min-height: 80px; position: relative; } .u9f3bf1165720842e566086068208753a , .u9f3bf1165720842e566086068208753a:hover , .u9f3bf1165720842e566086068208753a:visited , .u9f3bf1165720842e566086068208753a:active { border:0!important; } .u9f3bf1165720842e566086068208753a .clearfix:after { content: ""; display: table; clear: both; } .u9f3bf1165720842e566086068208753a { display: block; transition: background-color 250ms; webkit-transition: background-color 250ms; width: 100%; opacity: 1; transition: opacity 250ms; webkit-transition: opacity 250ms; background-color: #95A5A6; } .u9f3bf1165720842e566086068208753a:active , .u9f3bf1165720842e566086068208753a:hover { opacity: 1; transition: opacity 250ms; webkit-transition: opacity 250ms; background-color: #2C3E50; } .u9f3bf1165720842e566086068208753a .centered-text-area { width: 100%; position: relative ; } .u9f3bf1165720842e566086068208753a .ctaText { border-bottom: 0 solid #fff; color: #2980B9; font-size: 16px; font-weight: bold; margin: 0; padding: 0; text-decoration: underline; } .u9f3bf1165720842e566086068208753a .postTitle { color: #FFFFFF; font-size: 16px; font-weight: 600; margin: 0; padding: 0; width: 100%; } .u9f3bf1165720842e566086068208753a .ctaButton { background-color: #7F8C8D!important; color: #2980B9; border: none; border-radius: 3px; box-shadow: none; font-size: 14px; font-weight: bold; line-height: 26px; moz-border-radius: 3px; text-align: center; text-decoration: none; text-shadow: none; width: 80px; min-height: 80px; background: url(https://artscolumbia.org/wp-content/plugins/intelly-related-posts/assets/images/simple-arrow.png)no-repeat; position: absolute; right: 0; top: 0; } .u9f3bf1165720842e566086068208753a:hover .ctaButton { background-color: #34495E!important; } .u9f3bf1165720842e566086068208753a .centered-text { display: table; height: 80px; padding-left : 18px; top: 0; } .u9f3bf1165720842e566086068208753a .u9f3bf1165720842e566086068208753a-content { display: table-cell; margin: 0; padding: 0; padding-right: 108px; position: relative; vertical-align: middle; width: 100%; } .u9f3bf1165720842e566086068208753a:after { content: ""; display: block; clear: both; } READ: How To Get An Answer In An Inspector Calls EssayCapulet But fettle your joints gainst Thursday next To go with Paris to Saint Peters Church, Or I will drag thee on a hurdle thither. This illustrates how little the Capulet parents really know about their daughter, who has been brought up almost exclusively by her nurse. It points to a distinct absence of compassion on their part, as we see particularly from the father in his insistence that she marry Paris or leave home with nothing and take her chances on the streets. There is nothing of the unconditional love parents supposedly have for their children evident in her father. His unreasonableness fuels Juliets determination to defy him, driven to desperation as she is by her secret marriage (to Romeo) and his exile to Mantua over the killing of Tybalt, Juliets cousin. Romeo too grows desperate, kept apart from his young and unacknowledged wife, about whom his very world revolves and from whom he is effectively estranged by royal decree. Having sought the help of Friar Laurence, he is in his hands, and has to wait for news of Juliet and when they will be together. He cannot begin to suspect, let alone know, that fate will intervene cruelly to block Friar John who is on his way to Romeo with news of Friar Laurences plans and that Balthasar who has witnessed Juliets funeral will reach him first. As an audience we are fully appreciative of the frustration Romeo and Juliet must feel. Their love is all-encompassing, and that it is strong enough to sustain their hopes for a future together is almost miraculous. However, their fate is in the hands of others, all adults. They themselves are virtually powerless to change circumstances to their advantage; so, when Romeo acts impulsively on misinformation Romeo Is it een so? Then I defy you, stars! we wish him the best but fear the worst. In an inflexible world ruled by adults, the chances of teenagers succeeding against the odds are slim. We cannot lay the blame for the deaths of Romeo and Juliet exclusively at the doors of their parents, real or surrogate. It is as the Prince gravely states all are punished. The feuding families have to bear the guilt equally for their lingering enmity. A tale of young love, with all its promise, has become a catalogue of death. In the end the city has lost five young citizens, cut down before their time. Society is the poorer for the losses. Those who survive share the blame for what has happened, since the whole city has had a hand, directly or indirectly, in the deaths. All are indeed punished.

The Hunger Games free essay sample

Directions: Choose one of the following essay prompts below. You will compose a five paragraph essay that contains the following: * An introduction that contains an attention getter and a thesis statement (argument) * Three body paragraphs each of them containing one supporting reason for your thesis. All body paragraphs should have a topic sentence, introduction to a quote, a quote (evidence), and an explanation of your quote. NONE OF YOUR BODY PARAGRAPHS SHOULD END IN A QUOTE!!!!!! A conclusion that restates your thesis and provides closure to your paper Select one of the following prompts for your essay. Remember that you must take a stance on the topic to argue in your thesis statement. I suggest you start preparing to write this essay now! You should start working on your thesis statement and finding evidence (quotes) to support it now. You can bring anything you prepare ahead of time to the final to use to help you write your paper. We will write a custom essay sample on The Hunger Games or any similar topic specifically for you Do Not WasteYour Time HIRE WRITER Only 13.90 / page However, you must do the majority of your essay composition during the final exam time. You will write this essay with a pencil and paper; we will not have access to computers. Remember this essay is worth 20% of your final grade. Prompt Options: 1. Is Haymitch a good mentor to Katniss and Peeta? (criteria definition) 2. How does Katniss’ relationship with Peeta change her personality? (character development) 3. Is the country of Panem a fair and just society? (criteria definition) 4. Alternate suggestions can be approved by me ahead of time.

reviw essays

reviw essays The concert was ticketed as the Gaither Homecoming, which included numerous soloists and groups. They include but are not limited to the following: The Gaithers, The Happy Goodmans, The Hoppers, The Talleys, Janet Pascal, Jesse Dixon, Candy Christmas, Anthony Berger, and Squire Parsons. The gospel music concert was held at the Bi-Lo center in Greenville South Carolina on Saturday April 15, 2000 at 6pm. Our seats were in suite 103B, which is located in an enclosed box on the mid-level, which had monitors provided. Looking down from above provided and excellent view of the performers and allowed us to view the stage setup which was one that allowed the performers to access all directions. It is the typical setup that Bill Gaither uses in that it is in the shape of a large plus sign with sublevels for the musicians and awaiting performers. As well as the above-mentioned arrangement, they had large television monitors above the stage that could be viewed from every direction. Numerous traditional gospel songs as well as new ones were performed during the concert. They included Shouting time in Heaven, Forever Settled, I wouldn't take nothing for my journey now, The Body and the Blood. The concert as a whole was wonderful as always. Bill Gaither always has a vast number of groups and singers accompanying him. His sound system was set at a reasonable and enjoyable level so that the music could be understood as well as enjoyed by all that attended. I personally would recommend anyone who hasn't had the opportunity to hear his music to attend one of his concerts when he returns. I thoroughly enjoyed the concert and would attend another if given the opportunity. ...

The Origins of the Rose-Colored Glasses Idiom

The Origins of the Rose-Colored Glasses Idiom We all know that seeing something through rose-colored glasses means you see it as better than it really is, but did you ever wonder where this idiom originated? Finding the Origin The origin of this idiom is difficult to find. Apparently, nobody who writes about rose-colored glasses has bothered to actually look through them. Once you do, the origin is obvious. One of the best descriptions is over on Wise Geek, where they go through several, optimism-focused theories ranging from the symbolism of roses and rose gardens to the Victorians to map-makers glasses to gazing through the bottom of a wine glass. There are also references to the book  Tom Brown at Oxford  by Thomas Hughes and written in 1861, but its unclear if this is the first use of the term. Rose Colored Glasses and Chickens A more curious suggestion is that the term comes from the use of goggles on chickens to keep them from pecking feathers off each other. An article about chicken eyeglasses at Ask.com states that rose-colored lenses as the coloring is thought to prevent a chicken wearing them from recognizing blood on other chickens, which may increase the tendency for abnormal injurious behavior. They were mass-produced and sold throughout the United States as early as the beginning of the 20th century. This seems like an odd association of the term since rose-colored glasses accentuate reds unless chickens see red differently than humans. Regardless, it may be contrary to our usage of the idiom. No matter what the origin of the idiom is, seeing the world through rose-colored glasses really does make the world a better place. The reds are  incredibly  red, the greens lush, the blues truly electric. Willy Wonka, eat your heart out.

Innovation Essay and Reflective Report Example | Topics and Well Written Essays - 1250 words

Innovation and Reflective Report - Essay Example The management of creativity is highly problematic. As may be inferred from Trott (2005), among others, the concepts of management and creativity appears to be antithetical with the notion of managing creativity' emerging as something of a paradox. Expounding upon this, Burns and Stalker (1961) emphasise that creativity is fundamentally founded upon freedom while management is premised upon control with the implication being that the management of innovation/creativity is synonymous with the control of freedom. Even while conceding to the somewhat oxymoronic character of the stated, the fact remains that within the organisational setting creativity has to be directed and managed in order to avoid its descent into purposelessness. Management is fundamental to the direction, as opposed to control, of creativity. Generic definitions of creativity, as proposed by Drazin et al. (1999:287) maintain it "as the process of engagement in creative acts, regardless of whether the resultant outcomes are novel, useful, or creative." This definition, even though it is a valid and legitimate descriptor of creativity, is indicative of a form of creativity and innovation which organisations strive to avoid. Within the organisational context, and as may be inferred from several researchers, creativity must be novel, useful and innovative (Singer and Adkins, 1984; Amabile, 1996; Drazin et al., 1999; Kennedy, 2001). Accordingly, the management of creativity

Economics Essay Example | Topics and Well Written Essays - 750 words - 2

Economics - Essay Example This way corn serves a two-way purpose and that will definitely increase its demand. Corn and soybean are considered as substitutes and according to economic theory if demand for a product raises then the demand for its substitute will obviously decline. Following this principle the price of the soybean will decline. Again corn and soybean shares the same habitat for production, especially the prime raw material for any agricultural production the land. Now an increased demand for corn will also lead to a higher price for the same, since price and demand are directly correlated. A product that is offering higher price will definitely translate into higher profit for the producer and an immediate shift from production of soybean to that of corn. Higher percentage of land and effort will now be directed towards corn production than that of soybean (Pearce, 2006). The above discussion seems economically sound, however a careful investigation might reveal that this holds for short run. O nce the producer starts to devote more land and other raw materials to the production of corn, corn production will rise and production of soybean will fall. Hence in long run owing to higher supply of corn its price will come down and that of soybean will go up as it is scarce now. These points to the fact that in long run an eventual equilibrium will be reached where both will be produced at an optimum level for the economy. Last but not the least since, energy has an ever increasing demand, hence if corn can project itself as a viable source of alternative energy in long run that have enough potential to replace fossil fuels then the trend for substituting soybean production land and raw material in favor of the corn might show a sustained trend, with soybean production looking for an alternative way as itself is a nutritious and valuable food source along with a rich source for food oil. It is obvious that since there is high need of alternative form of energy and that especiall y of bio fuel; corn oil as an important source of bio fuel will enjoy this boom in demand and price for this product will go up. The magnitude of this rise in price is subject to much debate. First of all if demand for a product is matched by its supply then the rise in price is minimal or zero. However if this is not the scenario that is there is excess demand then the price will go up. Interestingly it is worth noting that in case of excess supply the price might also go down even courting a rise in demand for the concerned product. The excess supply often follows a rise in demand owing to the behavioural pattern of the producer who might over estimate the rise in demand and increase his supply of corn in tune of his expectations. Apart from this demand-supply interaction, many other factors do operate while determining the fate of the corn oil. If people are well aware of the potential that corn oil holds as a fuel and alternative source of energy that will definitely translate i nto higher demand. Again this has to be also undertaken into the realm of analysis that whether any other form of substitutes to corn oil does exist, that might be cheaper, easily available in plenty and better source of energy. As a viable source of alternative energy in the long run corn oil will face quite a competition with Jatropha and Pongamia pinnata (Bridgewater, Halford and Karp, 2010, p. 236) and that outcome will

Roles of Women Essay Example for Free

Roles of Women Essay The configuration of a womans identity consists of the expectations that society places on her. Such expectations are still in existence today. Authors from the nineteenth and twentieth century are using literature and poetry as a vehicle for the new role and passion of the woman. Such authors as Kate Chopin, Mary Wilkins Freeman, Marge Piercy, Edna St. Vincent Millay and Henry James evoke a new sense of expectations for women in their use of literary language. One must acknowledge the differences in the expected roles of women and those the authors are portraying in order to penetrate the effect the author is trying to convey. These authors go beyond the norm and give women hope for the future. Kate Chopin creates a female character in At the Cadian Ball and The Storm that is vivid and defiant. Calixta is the image of hope that an authentic woman dares to embody. Chopin challenges society in her literature. She tests the roles of women. For instance, the female character she depicts in The Storm and The Cadian Ball is sexually overbearing, an adulterous, and presumptuous. Radek suggest that women of the nineteenth century were not supposed to have any real sexual contact before their marriage. The characteristics that Calixta possesses are dissimilar to the expected roles of women. The women of this time should be reserved, subservient, compliant, and gentle creatures. Henry James paints a picture of a similar vixen in Daisy Miller, although Daisy is innocent and naive in her promiscuity. James, no doubt being male, depicts women in a role outside of that of society. He portrays Daisy as innocently flirtatious. While this is not completely immoral, it is defiant of a placid nature. Mary Wilkins Freeman does not create as much controversy as Chopin, although she does create characters that embody independence rather than subservience. In The New England Nun, Louisa encompasses the typical homemaker characteristics, but she withstands independence when she rejects submission to Dagget, while declining to marry him. Wilkins expresses the hindered spirit of rebellion in The Revolt of Mother. She uses her words to convey the rebellious attitude the woman feels and is dared to communicate. She expresses the anger and uprising women are mandated to keep silent. Poetry is a vehicle for thought provoking expression that flows gently. Such poets as Edna St. Vincent Millay and Marge Piercy communicate their thoughts through the flow of language. Edna St. Vincent Millay writes in an emotional upheaval. In I, Being Born a Woman and Distressed, she transmits her despairing and vulnerable attitude. Marge Piercy writes from the corner in which women confine themselves. She portrays the loneliness that one feels because of the expectations that society places on them. The character in Barbie Doll is driven to suicide because she falls short of these expectations. This poem plays out the helplessness of the woman, while Whats That Smell in the Kitchen portrays the womans rebellious nature. This wife is tired of being socially correct and acts out in fits of rage. Kate Chopin, Mary Wilkins Freeman, Marge Piercy, Edna St. Vincent Millay and Henry James are writers of today. They innovate the true desires, passions, and frustrations of the American woman. While many of them are unable to articulate their inner desires and frustrations through physical expression, due to social restraints, they are able to express these emotions through their writing. This vehicle of emotion is a channel for the mind, body, and soul because of societys secluding forces. These authors are able to play out the roles that they desire, those roles that are unmentionable, through their words. Their words are the true expression of a womans mind and feelings, while society believes that women are not suppose to behave or feel these ways. Hartman says that a womens God-given role was as wife and mother, keeper of the household, guardian of the moral purity of all who lived therein. In conclusion, through the years, it is prevalent that the inner woman bears similar characteristics. Women are consistently making a way through life to gain equality to men. They desire to express the emotions and passions they possess while stepping outside of the societal standards. Chopin uses Calixta as a symbolic representation of the womans sexual emotions that are forcibly in suppression. Freeman symbolizes independence in the character she creates. Millay, simply, expresses her emotions and frustrations as a woman. Piercy articulates the bondage that a woman is under due to the roles and appearances they are expected to maintain. Henry James, not being a woman, creates Daisy, a woman filled with innocent flirtation. This is a characteristic outside of the reserved, subservient expectation. Though these authors may be the initiation of controversy in the nineteenth and twentieth centuries, their rebellious illustrations are, no doubt, compelling to readers today. Works Cited Chopin, Kate. At the Cadian Ball . Chopin, Kate. The Storm . Freeman, Mary W. A New England Nun . Freeman, Mary W. The Revolt of Mother American Literature, vol 2, 6th ed. William E. Cane. New York: Pearson Longman, 2004. 145-159. Hartman, Dorothy. Womens Roles in the Late 19th Century. 10 Aug. 2005 http://www. connerprairie. org/historyonline/1880wom. html. James, Henry. Daisy Miller http://ci. moc. edu/webapps/portal/frameset. jsp? tab =coursesurl=/bin/common/course. pl? course_id=_367_1. Millay, Edna St. Vincent. I Being Born A Woman and Distressed American Literature, vol 2, 6th ed. William E. Cane. New York: Pearson Longman, 2004. 575. Piercy, Marge. Barbie Doll American Literature, vol 2, 6th ed. William E. Cane. New York: Pearson Longman, 2004. 1453. Piercy, Marge. Whats That Smell in the Kitchen? . Radek, Kimberly. Women in Literature. 9 Aug. 2005 http://www. ivcc. edu/GEN2002/Women_in_the_Nineteenth_Century. htm. Victorian Lace. 12 July 2005 http://www. geocities. com/victorianlace10/women. html. Wyatt, Neal. Biography of Kate Chopin. 1995 http://www. vcu. edu/engweb/eng384/katebio. htm

grachi tiberius gaius rome Essay examples -- essays research papers f

THE GRACCHI Tiberius Sempronius Gracchus was bon in 163 B.C. and came from a distinguished family. His grandfather conquered Hannibal, his father brought the Celtiberian war successfully to a close, reduced Sardinia, and was elected consul for two terms and sensor for one. His mother Cornelia was a woman of wide-culture who employed Greek tutors to educate her sons, Tiberius and Gaius. Two tutors who influenced Tiberius at a young age were Diophanes, a teacher of oration and Blossius of Cumae, a philosopher. After taking part in the campaign of 146 BC, which ended with the destruction of Carthage, Tiberius was elected quaestor in 137. Travelling through Etruria, Tiberius saw large estates worked by slaves and noticed the absence of free peasants. It is said that Tiberius realized the need for reform while visiting this province on his way to Spain. There, Tiberius served in a war against Numantia under the consul Mancinus. After suffering numerous defeats in battle, Mancinus attempted to abandon camp. However the Numantines, realizing what was happening seized the camp before they could escape. Tiberius saved the Roman army from slaughter by securing a treaty with the Spaniards. When they returned to Rome, Tiberius was seen as a saviour and blame was placed on the incompetent generals who were handed back to the Spaniards for execution. Tiberius himself escaped judgement by the skin of his teeth. According to Plutarch, ‘It would seem†¦that Scipio, who was then the greatest and most influential man at Rome helped to save them’ (1988, 159) There are a number of dominant motives for Gracchus’ want for reform. His knowledge of Greek political thought and practices allowed him to understand the needs and potential of the state, the Spanish campaign, slave revolts in Sicily, the increase in Rome’s unemployment rate and the impact the changing economy had on the republic. It doubtful that only one of these fuelled Gracchus’ desires for change, it is more likely a combination of many or all. When Tiberius began to speak out in politics he did not do so alone. He was backed by his father-in-law Appius Claudius Pulcher, who was Princeps Senatus and two others, Pontifex Mucius Scaevola and Pontifex licinius Crassus Mucianus. IN 133 Tiberius Gracchus was elected tribune. He proposed a ‘lex agraria’ which would make land owned by the state available for distribution ... ...ople. During Gaius’ visit to Junonia to oversee the construction effort, rumours were spread in Rome by his opponents of the delay and failure of his new colony. Through these rumours, Gaius lost favour with the people. This can be seen due to his failure to get re-elected for a third tribunate in 121. As tribune Minucius Rufus proposed to repeal one of Gaius’ bills, he gathered support. In a minor disturbance, a servant of consul Opimius was killed. The senate was forced to pass a resolution that consuls should see to it that the Republic came to no harm. Opimius summoned to arms senators and equites against Gaius and Flaccus who had occupied the Aventine hill. After failed negotiations they and their supporters were defeated and killed. It is said that the weight of their heads in gold was to be awarded to the man who brought Opimius the heads of Gaius and Flaccus. Once again political differences in Rome resulted in bloodshed and brought an end to the remaining Gracchi. BIBLIOGRAPHY H.H. Scullard, From the Gracchi to Nero 2003 Routledge, London Plutarch, Roman Lives 1988 Penguin E.S. Shuckburgh, History of Rome 1896 Macmillan & Co. Ltd, London

Spanish vs. Ottomans

When empires expand, they all have a plan in mind on how and why they want to expand. It can differ from religious, wealth, or power reasons. It can also be with areas surrounding them or land far away. Simultaneously, empires can use similar military techniques, ways of keeping people in order, or ways of keeping up the economy. During the time of 1450 to 1800, the Spanish Empire and the Ottoman Empire responded to their empire building similarly in the idea that spreading their religion was their first focus, while there were differences in their social and economic values because their regions required them to be that way.The Spanish and the Portuguese originally originate from the Iberian Peninsula where Christianity was popular. In an attempt to expand, the Spanish sought after America. They look at it as a land they could conquest and convert over to Christianity. The Ottoman Empire, who was originally Turkish rising in the areas of Anatolia and the Balkans, was founded under t he religion of Islam. The sole purpose was to take Islam further. However, when they expanded it wasn’t like a monarch anymore but the sultans just handed power over to warriors.That way they could spend time adding more people to the empire instead of just fixing the government. The Spanish, on the other hand, were more hands on. They created institutions, taxed the natives, and had forced labor going on. Their focus was geared toward making their empire stable enough that they could conquer more natives, not having to worry about the government. The main difference was that the Spanish were more hands on while the Ottoman’s concern shifted to status. Around the late Eighteenth century early Nineteenth century is when hierarchy became a major issue for Spanish while the Ottomans fell into place.For both, the ruling class, the Europeans for Spanish and the sultans for the Ottomans, was at the top of the hierarchy. Beneath there is where both empires differ. The Ottoman s had merchants and artisans beneath the sultans which was very uncommon. However, they gave much of the contribution of the arts for the Ottomans. They are the cause of shops being opened and public works being done that wouldn’t have been complete otherwise. On the other hand, the Spanish was more focused on your race and gender while still giving reference to your job.Whites were at the top having the dominant roles, mixed races such as mestizo and mulatto in the middle, and black people at the bottom. Their structure was made so that Europeans would constantly rule and that slaves could only do their job: work. That way no matter how many people were added on they’d have the foundation that the empire can build off of. Lastly, the Spanish and Ottomans focus on building the economy had two different focuses. While the Spanish were concerned with silver, gold, and sugar, the Ottomans were focused on expansion.When landing on Peru, the Spanish quickly created silver m ine. That led to labor work of people of lower class. This way the Spanish has a wide rule of people that can continue to grow the mining industry as long as they continue to bring in slaves. Granted that that system worked, the Spanish could now export silver in exchange for goods. It’s in Brazil where they got the sugar to exchange for slaves that continued to make their population increase. On the contrary, the Ottomans wanted warriors in charge. Under their control war and taking of nearby territory became focus.Janissaries, a group of an Ottoman army, got an increase in weapons which soon led them to dominating a lot of territory. Equally, both the Spanish and Ottomans went after an area they thought would be beneficial in growing. Ultimately, the Spanish and Ottomans had similar foundations while still being different. Both grew tremendously in their own way under their own religion. However, the empires ended because they were too focused on one area of the empire but not another. The Ottomans was with war and the Spanish with money. The important part was that both left a legacy behind.

Blood Disorders

Lily, a 4-year-old Caucasian female, has she been complaining of being tired all the time. She is pale and is a picky eater. Her mother is a single mom with a small budget to feed a large family. Lily eats only pasta, breads, and hot dogs, and she drinks only artificial fruit punch. Lily has iron deficiency anemia. Infants can be infected from the time of birth from certain forms of anemia. Certain forms of anemia are hereditary.When girls are not getting the proper amount of iron in their diet then they may become iron deficiency. There are many different symptoms of iron deficiency anemia but the most common are swelling of the tongue, drying of the lips, and eating and craving ice. Lily’s mother cannot afford the proper food filled with iron so the best thing that she can buy for Lily is foods and drinks that have vitamin C in it, such as orange juice. * * Davon is a 5-year-old African American male who has just moved to Chicago, and he is visiting his new pediatrician for a kindergarten physical.His mother tells the nurse that she carries the sickle cell trait and wants Davon screened for it. Davon may have the sickle cell trait. I would say that it would be hard to determine if Devon has a blood disorder because he has no symptoms. I do think that Devon is at risk of having sickle cell. Sickle cell is a disease that is inherited. African-Americans are at greater risk for the disease than any other ethnic group. Sickle cell is caused by genetic abnormality. It is diagnosed by a blood test. The blood test measures the amount of abnormal sickle hemoglobin.Sickle cell can be treated by medications such as pain medications, anti-inflammatory medications, and antibiotics for infection. * * Spencer has noted over the past several weeks that he is having more bruises, or ecchymosed, all over his body. After coughing this morning, he noticed tiny red marks all around his eyes. Spencer has thrombocytopenia. I would say that Spencer is at risk for thrombocytop enia. Some symptoms for thrombocytopenia are easy or excessive bussing, prolonged bleeding from cuts, and bleeding from the gums or nose.You can diagnose thrombocytopenia through a physical exam and a blood test. Sometimes no treatment is necessary for thrombocytopenia because the problem heals on its own. However in some cases treatment may be necessary for the underlying cause or perhaps a blood transfusion from loss of blood. Thrombocytopenia could be prevented by treating the underlying causes that may cause thrombocytopenia. When having any type of blood disorder the best way to stay healthy is by keeping a healthy diet and seeing your physician regularly. * * * * * Sources: 1) WebMD 2) Mayo Clinic * * Blood Disorders Blood disorders describe problems associated with blood components such as red blood cells, platelets, enzymes, plasma and white blood cells. The characteristics of blood disorders depend on the real blood disease. Blood disorders can also be associated with hereditary characteristics whereby some disease causing organisms are transferred from parents to children. Blood disorders or diseases lead to continuous bleeding in case of an injury and poor blood clotting. Blood diseases result from abnormalities in blood itself or defects in blood vessels.The three given cases in this paper relates to various blood disorders associated with lifestyle, genetics and injuries. The first case of four years Amy, who complains of tiredness al the time and eats pasta, breads and hot dogs, and drinks artificial fruit punch, is a case of anemia. Amy is a pale and picky eater and her mother is single and cannot afford to feed large family so it means that her daughter consumes unbalanced diet. Anemia is a blood disorder whereby the number of red blood cells is insufficient to supply enough iron to body parts (Hadorn Ernst, 1961).Iron deficiency is the main cause of anemia and children are vulnerable to this disorder. Main characteristics of anemia include fatigue, slow healing of wounds, weakness, drowsiness and dizziness. Amy complains of being tired all the time and this is one of the main symptoms of anemia. The blood disorder is diagnosed through examination of blood sample and in many cases; the red blood cells are small and pale. Anemia is treated by iron tablets and consumption of vegetables such as spinach and foods rich in iron.Anemia in this case of Amy can be prevented through consumption of well balanced diet and avoiding any circumstances that can lead to excess bleeding such as injuries. In the case of Marcus, a five-year-old African American male whose mother wants the nurse to screen his son for trait is a case of hemochromatosis. It is a case of hereditary blood disorder that has been transferred from mother to son. Hemochromatosis is one of the common hereditary blood disorders that make body tissues to absorb too much iron. Being a hereditary disorder, hemochromatosis is known to develop from dietary iron intake (King E.John, 2002). The blood disorder leads to severe iron overlap in children and young adults. It is caused by defect in HFE gene responsible for controlling amount of iron observed from food. Children who inherit the defective gene from one parent become carries of the disease but may not develop it. Symptoms of hemochromatosis include joint pain, abdominal pain, and fatigue and heart problems. The blood disorder is diagnosed by collecting information concerning family history, physical examination and routine blood tests.Hemochromatosis is treated by controlling the amount of iron getting into the body through phlebotomy process. Prevention of hemochromatosis is very technical as it is a hereditary disease transferred from parents to children through genetics. However, it can be prevented by protecting the body from excess iron. In the case of Richard, he is likely to have thrombosis as is analyzed in his body condition of numerous bruises and tiny red marks around his eyes. Thrombosis is clotting of blood vessels because of blood clot that blocks a vein or artery. Blood clot is caused by damage of blood vessel or changes in blood flow.Symptoms of thrombosis include numerous bruises, swelling of body parts and red spots as a result of blood clot (Wood M. Stephen, 1997). Physical examination of body parts is the best alternative for thrombosis diagnosis. The blood disorder is treated by an anticoagulant that allows thinning of blood. Thrombosis can be prevented through wearing of pressure stockings and use of blood thinners. References Hadorn Ernst, 1961, Developmental Genetics and Lethal Factors, Methuen, Ursula Mittwoch. King E. John, 2002, Mayo Clinic on Digestive Health, Mason Crest. Wood M. Stephe n, 1997, Conguering High Blood Pressure, Perseus Books. Blood Disorders Lily, a 4-year-old Caucasian female, has she been complaining of being tired all the time. She is pale and is a picky eater. Her mother is a single mom with a small budget to feed a large family. Lily eats only pasta, breads, and hot dogs, and she drinks only artificial fruit punch. Lily has iron deficiency anemia. Infants can be infected from the time of birth from certain forms of anemia. Certain forms of anemia are hereditary.When girls are not getting the proper amount of iron in their diet then they may become iron deficiency. There are many different symptoms of iron deficiency anemia but the most common are swelling of the tongue, drying of the lips, and eating and craving ice. Lily’s mother cannot afford the proper food filled with iron so the best thing that she can buy for Lily is foods and drinks that have vitamin C in it, such as orange juice. * * Davon is a 5-year-old African American male who has just moved to Chicago, and he is visiting his new pediatrician for a kindergarten physical.His mother tells the nurse that she carries the sickle cell trait and wants Davon screened for it. Davon may have the sickle cell trait. I would say that it would be hard to determine if Devon has a blood disorder because he has no symptoms. I do think that Devon is at risk of having sickle cell. Sickle cell is a disease that is inherited. African-Americans are at greater risk for the disease than any other ethnic group. Sickle cell is caused by genetic abnormality. It is diagnosed by a blood test. The blood test measures the amount of abnormal sickle hemoglobin.Sickle cell can be treated by medications such as pain medications, anti-inflammatory medications, and antibiotics for infection. * * Spencer has noted over the past several weeks that he is having more bruises, or ecchymosed, all over his body. After coughing this morning, he noticed tiny red marks all around his eyes. Spencer has thrombocytopenia. I would say that Spencer is at risk for thrombocytop enia. Some symptoms for thrombocytopenia are easy or excessive bussing, prolonged bleeding from cuts, and bleeding from the gums or nose.You can diagnose thrombocytopenia through a physical exam and a blood test. Sometimes no treatment is necessary for thrombocytopenia because the problem heals on its own. However in some cases treatment may be necessary for the underlying cause or perhaps a blood transfusion from loss of blood. Thrombocytopenia could be prevented by treating the underlying causes that may cause thrombocytopenia. When having any type of blood disorder the best way to stay healthy is by keeping a healthy diet and seeing your physician regularly. * * * * * Sources: 1) WebMD 2) Mayo Clinic * *

Research Paper on Measurement in Financial Recording

Research Paper on Measurement in Financial Recording Measurement in Financial Recording research paper: In the recent past there has been a strong a desire and need for reforms in the manner in which accounting of financial instruments and statements is done. This has come as a result of a number of developments in the market. These developments have mainly been characterised by diverse financial innovations, which have blurred the establishment of a clear distinction between the existing financial instruments. Consequently, this has contributed to developing markets for those instruments that have been traditionally considered as non tradable and illiquid (Enria et al, 2004). There has also been evident disappearance of the rationale of the existing diverse accounting treatment that is related to securities, banking and insurance services. This is because they all cover and serve similar economic function. There have been two major approaches which have been recommended in the previous decade as being essential in line with measurements in financial accounting. The first recommendation is anchored on methods of valuation in accordance to past transaction which is referred to as Historical Cost analysis. Second argument is based on the current existing market value, which is referred to as Fair Value Accounting. The Historical based approach has been a fundamental part of America’s accounting systems. Through this approach, assets are always presented on a balance sheet, in terms of their value at the time when they were being acquired, which is essentially the use of purchase cost. However, in this era where there is intense usage of financial instruments that are highly complicated, the majority of stakeholders are questioning the appropriateness of Historical cost accounting. This has also been fostered by the adoption of strategies for risk management which makes former prices to be obsolete. We are now compelled to come to the conclusion that, replacing the historical cost accounting with a current cost system, will lead financial reporting into being more accurate. This brings on board the adoption of Fair Valuation as being most appropriate financial accounting tool. Recent developments are evident from modifications made by the Financial Accounting Standards Board (FASB), on the Generally Accepted Accounting Principles (GAAP). These changes involve rapid modernisation of these principles in an effort to make financial statements more meaningful to industrial standard bearers, hence brings forward the essence of fair value in financial accounting to all c ooperate organisations (Enria et al, 2004). The releasing of statement 133 by FASB is meant to account for derivative instruments and diverse hedging activities. It requires an entity which will recognise all existing derivatives as being either assets or liabilities in the financial statement, and measure the instruments at a considerable fair value. This shades light on the paramount importance of developing techniques that will be used to refine measuring of fair value in all financial instruments. The valuation of major financial assets or liabilities must be based on cost or prices, which reflects on market assessment in the present conditions and values on the future of the cash flow, which is covered in financial instruments (Rezaee, 2001). FASB has clearly stated its goals for a fair market valuation. The board noted that it is fully committed to work diligently so as to resolve in a timely way, the contradictory practical and conceptual issues which are related to meaningful determination of fair values and portfolios in financial instruments. Most critics argue that, accounting through historical cost is highly reliable, due to the fact that it is based on transactions that have been historically documented, hence rarely subjected to any debate. Moreover, most observers will determine the original cost by confirming the documented facts in original purchase transaction. Nevertheless, this is not applicable in the current market situation where fairness in value is the basis of cooperate and industrial development. For financial statements to be useful, they must have reliability and relevance. However, these qualities always conflict one another. These differences have come out more clearly in the middle of a meltdown in international financial stability, and also the increasing use of fair valuation accounting on balance sheet to effectively value liabilities and assets. Although recording assets at Historical Cost may be considered reliable, recording of such assets at their fair value will still not be an effective and reliable indicator of the asset’s true value several years age. It still can be highly reliable but have little resemblance to the present market value of the asset. This has made the International Accounting standards Board (IASB), the FASB, and SEC to question the suitability of historical cost accounting, and develop preference for fair market valuation which is based on GAAP. Several drawbacks have been attributed to the extensive use and implementation of fair valuation in the Cooperate and business world. The first drawback focuses on expected increased income volatility with the adoption of fair valuation (Barth, 2009). For a long time, there has been heated argument that volatility has the potential to provide accurate and relevant information, and should be fully respected in financial statements. However, relying exclusively on fair value, especially on assets which are not commonly traded in liquid secondary market, will run the risk in which the information being disclosed covers artificial volatility that is supported by fluctuation in the value of the financial market. The role of banks and other cooperate groups in the transformation of maturity and liquidity acts as a second limitation of fair valuation. Banks jointly provide loan and deposit services, which puts them in a central position to establish liquidity on demand and also support all the needs of the major components of the financial sector. It is however argued that attempting to bring fair valuation into loans, does not recognize the positive and permanent future of banking that comes in through its significant contribution to bridging the asymmetries in information between borrowers and the lenders. In terms of advantages, the major aspect of fair value accounting is the development of a wide and improved scope in corrective action and market discipline. This accounting system would essentially lead to greater insight into the profile of the bank in terms of risks (Shortridge, Schroeder, Wagoner, 2006). It will also move many items that are out of the balance sheet into the balance sheet. If uninsured depositors, debt holders and shareholders are able to identify deterioration in the bank’s safety and its soundness, they will benefit efficiently in the financial stability that the world always crave for. Looking at the opposite side with regards to the cost of the bank, it is important to analyse its role in the transformation of maturity and liquidity. In most cases, banks take advantage of the tools that have been provided by innovations in the financial sector and consequently, rely on instruments that are more sophisticated to be able to perform their function in liquidity transformation. This means that fair value accounting will result to increasing the marketability of current assets that are illiquid. From time immemorial, financial reporting has evolved with stewardship being the main objective in accounting. In this financial reporting contemporary era, stewardship and provision of information that is useful in making decisions is viewed as being the major objectives for reporting. Barth outlines IASB and FASB pronouncement in the context of advancing their converged conceptual financial reporting framework, in which the boards agree that stewardship and accountability should not be different or separate objectives during financial reporting in business firms. However, the framework has to acknowledge that information in terms of business finance should be useful for credit, investment and decision on resource allocation (Enria et al, 2004). It is essential to determine if firms that have more asymmetric timely earning, have financial accounting information that is useful in terms of value, and whether firms that have more non-equity stakeholders who are strongly influential, have financial accounting information that is more useful in terms of value. From this perspective non-equity stakeholders incur higher transaction costs during diversifying of unsystematic risks as compare to equity stakeholders (Barth, 2009). As risks related to stewardship are part of the unsystematic problems, the demand for accounting information related to stewardship increases with the influential power of non-equity stakeholders. Many critics have called for substantial reforms in fair value accounting to be suspended, due to the fact that, it is perceived to be the major contributory factor to the severe financial crisis evident in 2008. Political interference from the European Commission and the U.S congress resulted to standard setter in accounting to considerably relax the rules. However, if a clear analysis is carried out, we will come to the realisation that Fair values played a limited role in the statements of banks income and their regulatory capital ratio, with the exception of only a few banks that have large trading positions. This means claiming that fair value accounting supported the crisis is a notion that is largely unfounded. In conclusion, the debate that surrounds fair value accounting and historical accounting is not on the vague of ending soon. However, it is important to realise and acknowledge the significance of fair value in developing an efficient and accurate system, which will effectively represent financial information. This will also include information on economical transaction that comes in handy for boards of directors, investors and analysts.

Why Cold Weather Makes You Pee

Why Cold Weather Makes You Pee Does it seem like you have to pee more when youre cold or when its cold outside than when its warm? Its not just your imagination!   When you are cold, your body wants to protect your vital internal organs from the temperature change. It does this by constricting capillaries in your hands and feet through a process called peripheral vasoconstriction. Your extremities get cold, but toasty warm blood bathes your core. This means there is more blood in a smaller volume, which raises blood pressure, causing your brain to signal the kidneys to remove liquid from your blood. Your urine volume is increased and you need to urinate. In addition to the effects of vasoconstriction, cold temperatures change how permeable cells are to water. Proteins called aquaporins act as channels to allow water in and out of cells more quickly than through osmosis. When body temperature starts to drop, aquaporins limit the amount of water allowed into some cells, including kidney and brain cells. Less water going into cells translates into more water in the bloodstream. Here too, your brain tells your kidneys to remove the excess water, filling your bladder and making you need to pee. Is Drinking Alcohol a Good Way to Keep You Warm? If you drink an alcoholic beverage to feel warm, youll likely make the situation even worse. The alcohol will dehydrate you, in part because it also inhibits aquaporins. Alcohol acts as a diuretic, so your body thinks it needs even less water than it was holding onto before you took that first sip. Alcohol does make you feel warm but actually hastens hypothermia by expanding the capillaries. From this effect, youd need to pee less, but the continued drop in temperature would eventually lead you to pee more and could kill you from cold. Another factor to consider is perspiration. If youre cold, youre not losing moisture through perspiration. When its hot, youre slowly (or quickly) becoming dehydrated by sweating. If you feel cold, youre retaining water compared with when youre warm.

Cold War era Presidents Coursework Example | Topics and Well Written Essays - 500 words

Cold War era Presidents - Coursework Example Issues that we consider to be at the core of the United States democratic experiment, like individual freedom, were trumped by the political realities of the Cold War whenever the two came into conflict. Sadly, they came into conflict more than we might like. On the one hand, we can accept the idea that Soviet-style communism was not a source of or way of providing real freedom. The Soviets were authoritarian and controlling, and the centrally-planned structure of the Soviet system was often enforced with violence, as well as with harsh, politically motivated punishments. In this sense, the fight against communism, whether it involved funding Afghani fighters resisting Soviet occupation, or fighting the North Koreans, or embargoing Cuba, can all be seen as effort to promote freedom abroad by curtailing and containing the spread of such a vicious and draconian form of communism. On the other hand, Cold War Presidents tended to make decisions that were so committed to fighting the spre ad of communism that they often sacrificed the freedom of many to do so. This happened both domestically and in foreign policy. On the domestic front, many core civil rights issues were left to droop, creating an uncomfortable proximity between the message America was trying to transmit abroad and the reality of freedom and equality at home.

Human Resource Management Individual assignment Essay

Human Resource Management Individual assignment - Essay Example Organizations refer to entities that comprises of several people, has collective goals and has both internal and external environments. The principle of separation in business management explains that organizations are legal entities capable of representing themselves in courts and make systematic decisions that strive to safeguard the accomplishment of the specific goals. The internal environment in organizations entails the relationships among the various people and the existence of support resources that ensure the accomplishment of the goals. The external environments constitute a fundamental relationship with organizations since they join the organizations to the society. The external environment may often constitute competition and markets. The relationships that an organization develops with the external environment, therefore, influence the success or failures of the organization (Cropper & Merkowitz, 1998). Organizations require effective management to accomplish their respective goals. Various theorists have fronted ideas and theories of management to help managers provide effective management for their organizations key among such theories are the contingency theory and the systems theory. The contingency theory explains that every organization and situation in the organizations require tailored management techniques owing to their uniqueness. The management technique should address the issues in the organizations and situations thereby enhancing the efficiency of operations.

Fall of Eurozone Consumer Prices Essay Example | Topics and Well Written Essays - 750 words

Fall of Eurozone Consumer Prices - Essay Example The region is just recovering from the economic depression that affected the entire globe. A major concern in the region was that consumers would opt to postpone spending on investment opportunities, as they fear the downward spiral into a full-blown economic depression. So what is the European Central Bank doing to prevent the region’s economy from experiencing the adverse effects of a fall in consumer prices? Mario Draghi, the President mentioned that the bank was set to convene a meeting in Frankfurt, Germany to discuss aggressive strategies aimed at containing the fall in consumer prices before it became unmanageable. In addition, he inferred that the rumoured onset of deflation was unlikely to happen; however, he did not rule it out completely. Among the possible intervention strategies the Bank was likely to take was quantitative easing, which is similar to that undertaken by the US Federal Reserve. Although controversial in the region, this strategy proved helpful in stimulating the American economy. Quantitative easing entails the process by which a country’s Central Bank injects money into the country’s economy with the intention of managing inflation by increasing spending by the private sector. In this case, the Europe an Central Bank would purchase financial assets such as government bonds using money it has creates. It is crucial to note that the money used in this process is not tangible money, as it is generated electronically. Arguments against the use of Quantitative Easing are as follows.

Impact of Social Media On Graphic Designers

Impact of Social Media On Graphic Designers The emergence and popularity of online social networks in recent years has changed the Internet ecosystem leading to a more collaborative environment. Nowadays, hundreds of millions of Internet users participate in social networks, form communities, produce and consume media content in revolutionary ways Introduction The internet is basically about people but it is recently seen differently in comparatively terms. Currently, the transformation that is tossing both the worldwide web and the numerous markets that depend and feed on it is possibly in economic terms a correction that is forcing it into being a web of people or a community that utilise websites as communication channels to interact with other people (Fraser Dutta, 2010). In view of this, the composition of the internet has been taking over by web 2.0. Social media can be described as a vehicle for the sharing and cooperative creation of information by individuals and communities (Hansen et al 2010). It particularly depicts online communication tools and applications. Features of a social media platform may include: Collaboration it promote interaction and contribution by audience. It provides an alternative way of transmitting information. Thus, social media tools particularly promote and support feedback, comments, and sharing of information. Community social media furnishes an infrastructure for interaction among existing communities and the formation and interaction of primarily or exclusively web-based communities around common interests or goals. Connectedness social media helps to connect people and information in one place. Web 2.0 is often talked about in the same breath as social media. Web 2.0 is a term that is used to define the evolution of the World Wide Web. While there isnt a hard and fast line between Web 1.0 and Web 2.0, Web 1.0 can be understood to represent a web as information model and Web 2.0 to represent a web as participation model of web activity (Cormode Krishnamurthy, 2008). Characterized by the creation and interaction with content, users take part and collaborate through virtual communities and social media tools which help easy sharing of information and ideas. Examples of social technologies used to create social media include those from communication (such as Blogs), collaboration (such as Wikis), communities (such as Facebook), reviews and opinion (such as Amazon reader review) and multimedia (such as YouTube). On the web, social networks are contained versions of blog network which are spreading out in different directions. To join a social network, users normally create a profile and then build a network by connecting to friends and contacts in the network, or by inviting real-world contacts and friends to join the social network (Goodings2010). These communities retain the interest of their members by being useful to them and providing services that are entertaining or help them to expand their networks (Booth, 2008). Such networks provide an extremely suitable space to instantly share multimedia information between individuals and their neighbours in the social graph. Social networks provide a powerful reflection of the structure and dynamics of the society of the 21st century and the interaction of the Internet generation with both technology and other people (Kumar, 2012). Social Media platforms are not new and almost every graphic designer is reasonably aware of it uses, benefits and effects it. It is a complex web and one shared link leads a graphic designer to another. Generally, individuals from all walks of life are engaged in the use of social media. Similarly, graphic designers patronise social media websites and many of them are reasonably fond on one or more of the social networks. However, noticeably, the current developments and challenges in graphic designing show that, social media has turned to be more of a requirement for almost every graphic designer. Currently, industries, institutions, corporate organizations, government and non-governmental organizations are changing their concentration towards social media for its ability to publicise and promote their interests and activities. With this development, the graphic design industry is no exclusion of this new development as most graphic designers employ the services of social media in one way or the other. By using social media, graphic designers share their views and their designing work and provide useful feedback to each other. Every new development in technology has its own advantages and disadvantages. Social media has its peculiar advantages and disadvantages just as every other technology available to the public for use. Generally, an innovation can either lead to advancement or destruction. Social media has an infinite benefit for graphic designers, however at the same time; it can demonstrate to be having extremely unfortunate or dire consequences. With abundance of internet connectivity and its low cost availability, social media has become the most inexpensive of all promotional media. Also, social media provide the designers an opportunity to learn from fellow designers and put that learned thing into their practice. In spite of the fact that social media provides enormous benefits to graphic designers, its overindulgence is bad. Likewise, too much indulgence in the social media websites may render most designers unproductive and redundant because designers often forget their basic work and go off-the-track from their main purpose and functional duties. It is of this backdrop that this article seeks to find the impact of social media on graphic designers; tailored to unravel the associated benefits and disadvantages derived from the use of social network platforms. This article presents an equilibrated analysis of social media and its impacts on graphic designers. Materials and Methods This is a qualitative research which seeks to investigate the impact of social media on graphic designers in Ghana. Observations and in-depth interviews were used to examine designers participation in online social media networks and its impact as they discharge their functional duties and responsibilities in their respective organizations. The sample frame of this research was drawn from all advertising companies, printing houses, printing presses and marketing companies in the Kumasi metropolis. This was because most of the graphic designers work with these companies and discharge similar or almost the same duties.

Societies Case for Censorship. :: essays research papers

Pornography and obscenity is all we see and hear about today in the news, with no exception to most movies and even TV. As of 12 years old this issue strikes a bigger interest than in the past. When I flip through the channels and see the news or watch a TV show there is something always on that a younger child should not be watching or learning about unless they are older. When the world censorship is thrown around it is a very controversial issue with the rights of the people and the way the company’s want to present their product.   Ã‚  Ã‚  Ã‚  Ã‚  When Irving Kristol wrote his article â€Å"Pornography, obscenity and the case for Censorship† he was putting down his views and his opinions the topic of censorship and all the other obscenities in the world. Kristol is proposing a very conservative and clean way to view American literature with all its freedoms to publish what ever is wanted. When reading his article it brings up many different points such as her main point of; â€Å"for the plain fact is that we all believe that there is a point at which the public authorities ought to step in to limit the ‘self-expression’ of an individual or a group†(604), this is exactly the way I feel on the topic.   Ã‚  Ã‚  Ã‚  Ã‚  When reading this article you have to look at the central claim that the author is making and agree with him or disagree. when going through this reading there where areas of its claims that have you thinking about our society and culture as a whole, that we are a species that loves its different types of uncensored media as well as its pornography and violence in their sports and everyday lives, â€Å"no society can be utterly different to the ways that its citizens publicly entertain themselves. Bearbaiting and cockfighting are prohibited only in part out of compassion for the animals; the main reason is that such spectacles were felt to debase and brutalize the citizenry who flocked to witness them† (604).   Ã‚  Ã‚  Ã‚  Ã‚   When Kristol speaks about his ideas of censorship; his claim that one day, not now but someday soon that the government is going to have to take this issue of censorship within a society and place in their hands. In essence Kristol is saying that this issue of censorship is not being carried out forcefully enough and it is hurting our society in the long run.

Industrial Training Research Paper on Esquire

AHSANULLAH UNIVERSITY OF SCIENCE & TECHNOLOGY Dept. of Textile Technology Course No: Tex-600 Course Title: Industrial Training Session: Fall 2010 REPORT ON INDUSTRIAL TRAINING From 1st June 2011 to 30th July 2011 ESQUIRE KNIT COMPOSITE LTD 22/58, Kachpur, Sonargaon, Narayangonj Supervising Teacher Nahida Akter Lecturer Dept. of Textile Technology, AUST Report Submitted By- Name| ID| Md. Imtiaz Ahmed| 07. 01. 06. 0| Md. Iftekhar Hossain| 07. 01. 06. 067| Md. Husne Mubarak| 07. 01. 05. | ACKNOWLEDGEMENT At first our gratefulness goes to Almighty Allah to give us strength & ability to complete the Industrial training.Industrial Training is an academic course of the Textile Technology Department of AUST. We want to thank Professor Dr. Mustafizur Rahman, Head, Department of Textile Technology, Ahsanullah University of Science and Technology, gave us an opportunity to choose preferable mill for Industrial Training. We chose Esquire Knit Composite Limited gracefully with the supervision of our teacher Mrs. Nahida Akter , Lecturer. We would like to thank her for her logical guidelines, constant inspirations necessary instructions and proper supervision.During the training in Esquire Knit Composite Limited we worked in all the departments related with the Wet Processing Section. We also worked sincerely in the Knitting Section, Maintenance and Effluent Treatment Plant. Moreover we learned about Quality Control Section, finished Fabric Inspection Section, finishing & specially dyeing. We would like to thank the management of Esquire Knit Composite Limited for giving us the opportunity to do industrial training successfully and also for their valuable suggestions. Our heartiest appreciation goes to Mr. Ehsanul Karim Kaiser, ED of operation EKCL and Mr.Hafizur Rahaman Nixon DGM (Fabric dyeing) for their permission to conduct our industrial training without which it would be incomplete. We would also like to thank Mr. Md. Zaman Manager (Fabric Dyeing) and Mr. Md Helal Sr. M anager (Fabric Finishing) for their insightful suggestions, guidelines and sharing their values with us. At last we want to thanks all the executives, senior executives and officials of EKCL for helping us to conduct industrial training successfully. Chapter 1: GENERAL INFORMATION ABOUT FACTORY 1. NAME OF FACTORY: Esquire Knit Composite Ltd. 2. STATUS: Private Ltd. Company 3.NATURE OF BUSINESS: 100% Export oriented composite knit Dyeing 4. OWNER OF THE MILL: Md. Mofazzal Hossain. 5. LOCATION OF MILL: 22/58, Kanchpur, Sonargaon, Narayangonj. 6. HEAD OFFICE: Ideal Trade Centre (9th & 10th Floor) 102, Shaheed Tajuddin Ahmed Sarani, Tejgaon I/A, Dhaka. Tel: 9113161, 9129396 Fax. 880-02-812 E-mail: [email  protected] net 7. YEAR OF ESTABLISHMENT: Fabric dyeing project: July-1993 Yarn dyeing project: September-1993 8. Project Cost: Taka 400, 00,000 9. Project Area: 200000 sq. feet 10. Total Manpower: a. Yarn Dyeing: 350 b.Embroidery: 120 c. Fabric Dyeing: 400 d. Maintenance: 150 e. Knit ting: 400 f. Garments: 4310 g. Printing: 150 h. Administration: 120 11. INSTALLED CAPACITY : 1. 54 Million kg 12. TOTAL TURNOVER: Average 13. PRODUCTION: a. Total:450 Metric ton per month b. Knitting: 12 tons/day c. Yarn dyeing: 8 tons/day d. Fabric dyeing: 15 tons/day e. Garments: 50000 pcs/day Site location of the mill WEST SOUTH NORTH Jatrabari Chowrasta EAST Dhaka-Chittagong Highway Esquire Knit Composite Limited Kachpur Bridge Sinha Textile Dhaka-Shylet Highway Dhaka-Chittagong Highway Different Departments:The mill has several sections to run smoothly, they are given bellow: * KNITTING SECTION: 1. Knitting 2. Inspection * KNIT DYEING SECTION: 1. Batch section 2. Store house for dyes &chemicals 3. Dyeing section 4. Lab & QC 5. Finishing * YARN DYEING SECTION: 1. Batch section 2. Store house for dyes &chemicals 3.Dyeing section 4. Lab & QC 5. Finishing * GARMENTS SECTION: 1. Merchandising 2. Sample 3. Production * MAINTENANCE: 1. Electrical 2. Mechanical 3. Utility * ACCOUNTS & COMMERCIAL SECTION * PLANNING DEPARTMENT * HUMAN RESOURCE SECTION * ADMIN SECTION PRODUCT MIX: a) Knitted grey fabrics: Single jersey Plain Fabric, 1Ãâ€"1 Rib, 2Ãâ€"1 Rib, 2Ãâ€"2 Rib , Lycra single jersey, Lycra Rib, Interlock, Polo Pique, Lacoste(Single/Double), Engineering Stripe, Feeder Stripe, Drop needle, 2/3 Thread fleece(Brushed/Un-brushed), Collar & Cuff etc. ) Knit Garments: T-shirt, Polo shirt, Sweat shirt, Golf shirt, Cardigan, Jogging suit, Short/Trouser, Legging, Fashion dress & Children wears etc. COMPANY PROFILE About Esquire : Esquire group is one of the leading among manufacturers & suppliers of a comprehensive range of quality knitted fabrics, dyed fabrics , Dyed yarns 7 Garments products for different customer requirements . Our range of products include dyed yarn , Dyed of knitted fabrics, Grey fabrics; Single jersey, Double jersey, CVC Fleece, Terry fabrics, Plain interlock, PC, 100% Polyester fabrics, Grey Melange and final products is Garments & printing.An ISO 9001:2000 certified company; Esquire Group continues to play a leading role in the manufacturing of Quality Garments in Bangladesh with the intent to further strengthen its position for its quality products. With our decades of experience and extensive industry knowledge, we have been able to face the challenges of the global market place and deliver quality products in adherence with market standards and parameters. Whatever your specification or quantity desired, our expertise and quality of service always remain the same .Modern production and techniques and flexible procersses and procedures allow us to offer efficient service for small batch as well as large orders . Esquire knit Composite is a 100% export –oriented company and work with the objective of achieving maximum customer satifaction. The Company has adopt innovative procedures and practice to meet customer expectations everytime they deal with us. We always welcome any feedback or suggestions from clients in order to serve them better . Vision: We will work together to define and understand every process performed by the rganization and continuosly strive to improve the quality at defferet stage of production and supply. Our aim is to grow by providing standard and superior dyeing products and Garments and support services that are always astep ahead,Eco-frriendly , and loved by our customers . We will give our customers every reason to rely on us and will achieve our vision by developing win-win partnership with our clients and open communications with our all stake holders including associates , customers and suppliers . Mision:Our mission is to lead the industry to the front with complete commitment and dedication on standards , Quality, productivity and customer satisfaction . Esquire Team : Another major asset to our sophisticated production facilities and technical expertise is our team of experienced and qualified people who are committed to achieve maximum customer satisfacti on by delivering superior value products . The team works under the able guidance of our chairman Mr. Mofazzol Hossain , under whose leadership, The company has reached so far in this business. Our senior management include * Mr. Mofazzol Hossain-(Chairman) Esquire group Mr. Ehsanul Habib- Managing Director (M. D) * Mr. Ehsanul Karim Kaiser-General Manager(G. M) * Dr. Md. Ali Haider-G. M(R&D) * Mr. A. S. M. Hafizur Rahman-DGM (Fabric dyeing) * Mr. Nazrul Islam Khan-AGM (Garments) * Mr. Faroqure rahman-AGM (Yarn dyeing) REMARKS : Esquire knit composite Ltd. is a member of Esquire group of companies , a leading house of industries and commerce in Bangladesh . It contains Esquire Electronics , Esquire knit composite , Esquire Knit Wears, Esquire Dyeing Industry , Esquire sourcing , MMH textiles , Fashion Paradise Ltd. CHAPTER 02 Raw Material RAW MATERIAL:Raw material is a unique substance in any production oriented textile industry. It plays a vital role in case of continuous productio n & for high quality fabric. The EKCL always try to use high quality raw material to export high quality and world class product. Raw material for knitting: Yarn Count Cotton:20/1s ,24/1s, 26/1s,30/1s,40/1s) Polyester:50/D,75/D, 100/D Lycra:120/D PC:30/1s CVC:30/1s Gray Millenge:28/1 s Raw material for yarn dyeing: Yarn: Cotton(20/1s,24/1s,26/1s,30/1s,40/1s), Polyester (50/D, 75/D100/D), Lycra (120/D), PC(30/1s), CVC(30/1s) Thread Dyes: Remazol, Ciba, Bezaktive SLF, Drimarene, Kimsoline.Auxiliaries: Raw material for Fabric dyeing: Fabric: Single Jersey, Lycra Single jersey, 1? 1 Rib, 2? 1 Rib, 2? 2 Rib, Lycra Rib, Interlock, Single lacoste, Double lacoste, Terry fleece, Polo pique, Lycra fleece, Gray Millenge. Dyes: Dyes list is given in the next page Auxiliaries: Auxiliaries list is given after dyes list Chemicals & Auxiliaries used in EKCL: Sr. No. | Type| Chemical Name| Supplier| 01. | Acid donor| 01. | DYAPOL-AB| DYAPOL| | | 02. | MEROPAN-CIT| CHT| | | 03. | OPTAVON-4UD| ZSCHIME R & SCH WARZ| | | 04. | SANDASID PB| CLARIANT| | | 05. | SENTAVIN RCO| H & M LTD. | 2. | Anti-creasing Agent| 01. | ALBAFLUID CD| HUNTSMAN| | | 02. | BIAVIN 109 (10% Sol. )| CHT| | | 03. | BIAVIN SFT (10% Sol. )| CHT| | | 04. | Cibafluid C| N/A| | | 05. | JINSOFTER-ACN| JINTEX| | | 06. | JINSOFTER CBA| JINTEX| | | 07. | JINSOFTER BSK| JINTEX| 03. | Antifoaming agent| 01. | ALBATEX FFC (10% Sol. )| CIBA CHEMICALS| | | 02. | CIBAFLOW Jet| CIBA CHEMICALS| | | 03. | CONTIPON S (10% Sol. ) | ZSCHIMER & SCH WARZ| | | 04. | JINDAFOAM JET| JINTEX| | | 05. | CROSCOLOR CDA| EURO DYE CTC| | | 06. | CROSCOLOR NJA| N/A| | | 07. | CROSCOLOR PTM| H & M LTD. | | | 08. | TISSOCYL RC9| H & M LTD. | | 09. | Zetafoam Zero (5% Sol. )| ZSCHIMER & SCH WARZ| 04. | Anti-pilling Enzyme| 01. | Al-Chemi (Conj)| N/A| | | 02. | BEIZYM TEC| HUNTSMAN| | | 03. | Bio-polish| Tex Resources| | | 04. | Biotex PIL(30% Sol. )| N/A| | | 05. | DELTA-BP| H. P. CHEMICALS| | | 06. | Ecotouch| Quality Colour & Chem. LTD. | | | 07. | Fibrilase HD 350| N/A| | | 08. | FORYLASE-DLS 170| N/A| | | 09. | HDL-160| Ablu| | | 10. | JINTEXME OEM| JINTEX| | | 11. | Liquid Enzyme| N/A| | | 12. | MEGA-EH3| Ablu| | | 13. | Retrocell PL7X| H & M LTD. | | | 14. | Retrocell ELX| H & M LTD. | | | 15. | Retrocell PLEX| N/A| | | 16. Retrocell-PLX-TRA| FINTEX TRADING CORP. | | | 17. | ROCKSOFT TM BIO-ACE| dyadic International| | | 18. | SILTEX PE40| CRECOON PVT LTD (PAK)| 05. | Creasing agent| 01. | INVATEX SA| HUNTSMAN| 06. | Detergent| 01. | INVATEX DA| HUNTSMAN| 07. | Dispersing agent| 01. | Domapol-B-conc. | N/A| | | 02. | DYAPOL XLF| ZSCHIMER & SCH | | | 03. | INVATEX AC| HUNTSMAN| | | 04. | OPTAVON SV| H & M LTD. | | | 05. | SETAMOL BL| BASF| | | 06. | SETAMOL WS| N/A| 08. | Emulsifier| 01. | MA-Humi-W(terge AP)| Elitte Textile| 09. | Enzymatic Killer| 01. | SILTEX ASILON OL| CRECOON PVT LTD. (PAK)| 10. | Fixing Agent| 01. ALBAFIX ECO| HUNTSMAN| | | 02. | ALCOFIX R| N/A| | | 03. | JINFIXER| JINTEX| | | 04. | ZETAFIX-R-( WER)| ZSCHIMER & SCH WARZ| | | 05. | ZETAFIX WER| ZSCHIMER & SCH WARZ| | | 06. | Zetasal-WER| JINTEX| | | 07. | TAIGAL N-600| N/A| 11. | General Chemicals| 01. | ACETIC ACID| CENTARY FAITH IND. LTD| | | 02. | BLEACHING POWDER| CENTARY FAITH IND. LTD| | | 03. | Biorol-JK| N/A| | | 04. | CAUSTIC SODA (Pearls)| ARABIAN ALRAIS. COM LTD| | | 05. | Chelam-NEX| N/A| | | 06. | Common Salt (Sikder)| N/A| | | 07. | DISODIUM PHOSPHATE| N/A| | | 08. | GLAUBER SALT| GRASSIM IND. LTD| | | 09. | Green-Acid (Jintex-CPS)| JINTEX| | | 10. GREEN ACID (Jintex-CPS)| N/A| | | 11. | GSS. | FINTEX TRADING| | | 12. | H2O2 (35%)| H. P. CHEMICALS| | | | | | | | 13. | H2O2 (50%)| CENTARY FAITH IND. LTD| | | 14. | JINTEX RH| JINTEX| | | 15. | Lazim PE| N/A| | | 16. | Lubisol-AM| N/A| | | 17. | SCOURNER BF-70| N/A| | | 18. | SETAVIN AS| N/A| | | 19. | Soda Ash| ZSCHIMER & SCH WARZ| | | 20. | Sodium Hydros| NIMIR SPECIALLY CHEMICAL LTD. | | | 21. | Soda PS| SHUNG SHUNG CHEM. COM. LTD. | | | 22. | TRI SODIUM PHOSP HATE| N/A| | | 23. | Viscobleach| ARABIAN ALRAIS. COM. (SA)| | | 24. | Viscocolor| ARABIAN ALRAIS. COM. (SA)| 12. | Levelling agent(For Reactive dyes)| 01. Ablutex-STR| Ablu| | | 02. | ALBATEX LD| HUNTSMAN| | | 03. | Alcoperse AD| N/A| | | 04. | BITGEN DL/P| N/A| | | 05. | CROSCOLOR ADM| H & M LTD. | | | 06. | CROSCOLOR HPJS| H & M LTD. | | | 07. | JINLEV CL-225| JINTEX| | | 08. | JINTEX RLA| JINTEX| | | 09. | Levajol-RL| N/A| | | 10. | MA SCOUR AIN (Perp-IN)| Ellite Textile| | | 11. | Sera-Gal-C-FTR| Scarlet Services| | | 12. | TAIGAL NL-4DH| N/A| | | 13. | TAIGAL SET| N/A| | Levelling agent(For Dispersedyes)| 01. | CROSPREP PBS| H & M LTD. | | | 02. | Doregal-SFD| N/A| | | 03. | DYAPOL-XLF| DYAPOL| | | 04. | JINLEV RLF| JINTEX| | | 05. | LYOGEN PES LIQUID-200| JINTEX| 3. | Peroxide Killer| 01. | Catalase BF| CHT| | | 02. | LORINOL ULTRA-125| N/A| | | 03. | R-THN/Catalase BF| ZSCHIMER & SCH WARZ| | | 04. | Setavan-PK(THN) 50%| ZSCHIMER & SCH WARZ| | | 05. | Reduzol PK (50% Sol. )| N/A| 14. | Reducing agent| 01. | IRGASOL DAM| CIBA CHEMICALS| | | 02. | MCL-TH| CLARIANT| | | 03. | Meropan / Redulite Red| CHT| | | 04. | Redulite – RED| CHT| | | | | | | | 05. | REDUPAL SU| CLARIANT| | | 06. | Zetasol – OR| ZSCHIMER & SCH WARZ| 15. | Sequestering agent| 01. | ANTISIL CONZ| N/A| | | 02. | HEPTOL KEB| CHT| | | 03. | JINTEXALATE SQ-117| JINTEX| | | 04. | LADIQUEST 1097| CLARIANT| | 05. | MEROPAN DPE| CHT| | | 06. | SECURON-C| COGNIS| | | 07. | Trilon – TB| BASF| | | 08. | TRILON TB (10% Sol. )| CLARIANT| 16. | Silicone| 01. | MICROCIL AM| SILVIA| 17. | Soaping agent| 01. | ASUTOL-PA| Ablu| | | 02. | CEREFAST CRD| N/A| | | 03. | COTOBLANCE NSR | CHT| | | 04. | ERIOPON R| HUNTSMAN| | | 05. | JINTEXALATE QSE| JINTEX| | | 06. | REACTIVE W| Texotech| 18. | Softener| 01. | Astrost SA (10% Sol. )| N/A| | | 02. | Bevasoft – CF (10% Sol. )| N/A| | | 03. | CROSOFT NBC (10% Sol. )| EURO-DYE CTC| | | 04. | Decosoft Jcc (10% Sol. )| Tex Color Int. | | | 05. | INSOFT CL (10% Sol. )| NIMIR SPECIALLY CHEMICAL LTD. | | 06. | JINSOFT AW-509| JINTEX| | | 07. | JINSOFTER FS/CS| JINTEX| | | 08. | Jinsofter ME| N/A| | | 09. | Jinsofter NF (10% Sol. )| JINTEX| | | 10. | JINSOFTER WCS-(FLAKES)| JINTEX| | | 11. | Ma-Smooth AL| EURO-DYE CTC| | | 12. | MEGASOFT FMG| HUNTSMAN| | | 13. | TUBINGAL| CHT| 19. | Washing agent| 01. | Ablutex BBV| Ablu| | | 02. | FELOSAN NOF| CHT| | | 03. | Flock-BM/Hydrostat-BM| N/A| | | 04. | Hydrostat BM| N/A| | | 05. | MA Disp-ARE (SOAP REA)| Ellite Textile| | | 06. | SCOURNER S-300| N/A| | | 07. | SINCAL – MED| ZSCHIMER & SCH WARZ| | | 08. | SQ-117| JINTEX| | | 09. | STAIN REMOVER| N/A| | | 10. ZETASOL SPECIAL| ZSCHIMER & SCH WARZ| 20. | Wetting agent | 01. | Ablutex AP-500| Ablu| | | 02. | Ablutex -AP-750 (42% Sol. )| Ablu| | | 03. | AMIDOPAL PB| ZSCHIMER & SCH WARZ| | | 04. | APRETAN EM| ZSCHIMER & SCH WARZ| | | 05. | ASILON OIL| MM TRADING| | | 06. | Chtex BS-401| Centary Faith Industrial Ltd. | | | 07. | Crosquent DS| H & M LTD. | | | 08. | DEPICOL RC-9| ZSCHIMER & SCH WARZ| | | 09. | DIAMUL SHC| YORKSITE| | | 10. | DYAPOL HWF| H & M LTD. | | | 11. | FELOSAN RGN| CHT| | | 12. | FORYI 146 (CONC. )| COGNIS| | | 13. | JINTERGE SCF Cond| N/A| | | 14. | JKY| T.CORPORATION| | | 15. | Lorinal R. K| N/A| | | 16. | MA-Lizen XLC| Ellite Textile| | | 17. | Optavon-AC-BL-100(ABC)| ZSCHIMER & SCH WARZ| | | 18. | Optavon 4UD| H & M LTD. | | | 19. | PERLAVIN NDA| N/A| | | 20. | RADUZIN ABC| Ablu| | | 21. | RADUZIN ABC| ZSCHIMER & SCH WARZ| | | 22. | RADUZIN AC-BL-100| ZSCHIMER & SCH WARZ| | | 23. | Zetasal WER (10% Sol. )| N/A| PRODUCTION PLANNING & SEQUENCE OF OPERATION Introduction and Basic Procedure of Planning and Control : A planned work brings success. Without planning nothing is completed within the required time. So planning has its own importance which is intolerable. Planning† gives a scheduled task and ‘control' completes it successfully. But production planning and cont rol is not an easy task. So EKCL has a self-sufficient and high-performance department called â€Å"Production Planning & Control†. Its Basic working procedure is as follows : 1. Taking orders from marketing division. 2. Analyzing the orders. 3. Planning for knitting the fabric. 4. Planning for dyeing the fabric. 5. Planning for finishing the fabric. It is only a basic procedure. It may change according to the type of order. Sometimes, order is places only for finishing the material or only for dyeing the white goods.Then some steps are omitted for planning procedure. 1. Taking orders from marketing division: EKCL marketing division supplies Fabric Orders to the Planning and control division by a special format. 2. Analyzing the orders: This section analyze the orders according to buyers, Order Quantity, type of orders (i. e. type of fabric, color to be dyed etc. ), delivery date etc. Then it selects which M/C. to use, no of M/C. to use, time required for production etc. This section plans for required quantity of fabric to be knitted (Order quantity + 6% of Order Quantity), knitting balance, fabric need to be dyed.Dyeing balance, RFD (Ready for delivery), RFD balance, delivered fabric and delivery balance. 3. Planning for knitting : This section plans for knitting production. It selects machine for knit the fabric for specific type of fabric, type of yarn used, required GSM, width etc. It also gives delivery data for knitted fabric. It also places orders for buying of yarn from spinning mills by a specific schedule. 4. Planning for dyeing the fabric: Production planning for dyeing is called ‘Batch Plan'. According to the batch no. And color, width, style and construction the batch plan is made. For easy understand this section gives some ‘T. cards. ‘T' cards are serialized according to the priority of delivery. The batches and ‘T' cards also serialized as to dye light shade at first and lastly the dark shades, since faulty shade s can be converted to dark color later. 5. Planning for finishing the fabric: Finishing schedule is same us the dyeing. After dyeing the material goes to the finishing section with the batch plan. Finished data is written to the batch card and is informed to the planning section. However, this section always enforces to all the departments to finish all the works within the delivery time given by the buyers.This section delivers materials by truck, micro, air etc to the customer within the meantime. Thus it plays a very important role in the success of the company. Production planning: Marketing Lab dip Lab dip approval Sample production Sample approval and order for bulk production Knitting Sample production according to buyer recommendation Bulk knitting production Batching Pre- treatment Dyeing Finishing Packing Ready for delivery (RFD) Garments section SEQUENCE OF OPERATION : Knitting Grey inspection Batch preparation White Processing Pretreatment Cotton dyeing Polyester dyeing Hydro-extracting Dewatering Drying CompactingFinal Inspection inspection Finished store Delivery to Garment industry Lab Section Lay out for Lab Chemicals Dexter HT Dyeing m/c Lab table Wash fast UN-1 Mathis Labomat Digi Oven Ahiba Naunce Rapid dyeing m/c Ahiba Naunce Rapid dyeing m/c Ahiba sample dyeing-1Robolab-1 Robolab-2 Trumble dryer Washactor-2 Spectophotometer-1 Lab Office Washactor-1 Spectophotometer-2 Lab ; Quality Control machines ; apparatus Specification SL. No. | Specification| SL. No. | Specification| 01. | ROBOLABModel No. : XPNManufacturer : Sclavous InternationalMade in :GreeceFunction :1. Making stock solution accurately. 2. Auto dispersing of given recipe. MACHINE TYPE :Robolab XPNMANUFACTURED BY â€Å"TALOS†-66100DRAMA GR MANUFACTURE IN YEAR :2009SERIAL No. 0963TOTAL WEIGHT : 800 KGPOWER : 4 KWELECTRICAL FEATURES : 220v 50HzPHASES : 1 MAX. CURRENT : 20 A | 02. | ROBOLABModel No. : XPNManufacturer : Sclavous InternationalMade in :GreeceFunction :1. Maki ng stock solution accurately. 2. Auto dispersing of given recipe. MACHINE TYPE :Robolab XPNMANUFACTURED BY â€Å"TALOS†-66100DRAMA GR MANUFACTURE IN YEAR :2009SERIAL No. : 0963TOTAL WEIGHT : 800 KGPOWER : 4 KWELECTRICAL FEATURES : 220v 50HzPHASES : 1 MAX. CURRENT : 20 A| 03. | Ahiba IRSample Dyeing machineModel No. : USTCManufacturer : USAFunction :1. Sample dyeing for cotton substrate. No. f pots in the dye bath : 20Brand : datacolor SPECTRUMâ„ ¢ family of solutions| 04. | Ahiba NuanceSample Dyeing machineModel No. : ECOManufacturer : Datacolor Function :1. Sample dyeing for cotton substrate. No. of pots in the dye bath : 20Brand : datacolor SPECTRUMâ„ ¢| 05. | Ahiba NuanceSample Dyeing machineModel No. : ECOMade in : USAManufacturer : Datacolor Function :1. Sample dyeing for cotton substrate. No. of pots in the dye bath : 20Brand : datacolor SPECTRUMâ„ ¢| 06. | MATHIS LabomatSample Dyeing machineModel No. : AGCH-8156Manufacturer : Warner MathisFunction :1.Sample dy eing for cotton substrate. No. of pots in the dye bath : 24| 07. | Dexter – High Temperature Dyeing machineModel No. : 73Manufacturer : Yuan Shen Enterprise Ltd. Made in : TaiwanFunction :1. Sample dyeing in high temperatureTemperature maintained by Glycerine bath. No. of pots in the dye bath : 24 Dexter ®PH : 3 ,VOLT : 220 Hz , INPUT : 9 KWMODEL No. :73 DATE : 93 07YUAN SHEN ENTERPRISE CO. LTD. | 08. | Wash Fast UNIModel No. : 60351Serl. No. : 145338 Manufacturer : Mag EngineersMade in : IndiaMethod used : (ISO-105C06,C01 AATC-61/135)Function :1. For checking color fastness after washing.No. of pots in the bath : 08 | 09. | DIGIOVENModel No. : C1301Manufacturer : Mag EngineersMade in : IndiaMethod used : (ISO-105E 01, E 04/AATCC-107/15-2002)Function :1. Sample drying for perspiration ; water fastness test. | 10. | PERSPIRPMETERModel No. : C2301Manufacturer : Mag EngineersMade in : IndiaMethod used : (ISO-105 E 01,E 04/AATCC-107/15-2002)Function :1. For checking color fastn ess to perspiration. | 11. | RAPID DYEING MACHINEFunction :1. Sample dyeing . 2. Wash-off the dyed sample. 3. Different pretreatment for dyeing. >Required time can’t set in this machine . No. of pots in the dye bath : 24 | 12. RAPID DYEING MACHINEFunction :1. Sample dyeing . 2. Wash-off the dyed sample. 3. Different pretreatment for dyeing. >Can pre set the dyeing time. No. of pots in the dye bath : 24 | 13. | TUMBLE DRYERModel No. : T4130Manufacturer : ElectroluxMethod used : (ISO-6330/AATCC-135)Made in : SwedenType : Front LoadingFunction :1. For drying fabrics/Garments after wash . | 14. | WASCATORModel No. : F0M71CLSManufacturer : ElectroluxMade in : SwedenMethod used : (ISO 6330-2000 ISO 3759-1999 ISO 5077-1984) (DIN EN 25077/26330-1994)Type : Front loading , Rotating drum .Function :1. For checking appearance after wash . 2. For checking dimensional stability . | 15. | WASCATORModel No. : F0M71CLSManufacturer : ElectroluxMade in : SwedenMethod used : (ISO 6330-2000 ISO 3759-1999 ISO 5077-1984) (DIN EN 25077/26330-1994)Type : Front loading , Rotating drum . Function :1. For checking appearance after wash . 2. For checking dimensional stability . | 16. | SPECTROPHOTOMETERModel No. : SF600X(Spectraflash)Manufacturer : ElectroluxMade in : USASoftware Used :1. DCI match. 2. Color toolsFunction :1. Color matching . 2.Measuring color difference . 3. Measuring the reflectance % of a dyed sample. 4. Measuring the strength of dyestuff. | 17. | SPECTROPHOTOMETERModel No. : CM-3600dManufacturer : MinoltaMade in : IndiaSoftware Used :1. JaypakFunction :1. Color matching . 2. Measuring color difference . 3. Measuring the reflectance % of a dyed sample. 4. Measuring the strength of dyestuff. | 18. | PRECISION OVENSample dryerModel No. : DO-452Manufacturer: JF Instrument Co. LtdMade in : TaiwanFunction :1. Sample drying after washing ; drying . | 19. | CROCKMETERJames H. Heal ; Co. Ltd. Halifax , HX 36EP , England. | 20. | CROCKMETER Model No. 125302Manufacturer : RoachesMade in : EnglandMethod used : (ISO–105X12 / AATCC-8)Function :1. For checking color fastness to rubbing of yarn . | 21. | Wrap Reel ; Balance(Yarn count tester)Model No. : Roaches International Ltd. Made in : EnglandFunction :1. To determine Yarn count . | 22. | Yarn Appearance Tester(Auto winder RB)Model No. : Y0831Manufacturer : Mag EngineersMade in : India Function :1. Checking eveness of yarn ; grading accordingly . | 23. | Unistretch M/CModel No. : C0501Manufacturer : Mag EngineersMade in : India Method used :1. Button / Snap pull test : IHTM020/ASTM 4846. 2. Seam slippage : UNI 9743/BS 33203.Lea strength : ISO 6939/ASTM D 15784. Single yarn strength test :ASTM D2256| 24. | Mag Sun FastModel No. : C 0605Manufacturer : Mag EngineersMade in : India Method used :ISO-105B02/AATCC-3Function :1. For checking color fastness to light . | 25. | Auto Burst 28(Bursting Strength Tester)Model No. : C 0601Manufacturer : Mag EngineersMade in : India Method used :ISO-13928-2/1 2945-1ASTM D 3787 , 3786Function :1. To measure bursting strength to fabric . | 26. | Auto pill(Pilling Tester)Model No. : C 1401Manufacturer : Mag EngineersMade in : India Method used :ISO-12945-1,2Function :1. To check pilling of fabric. | 27. | pH MeterModel No. 6173Function :1. To measure pH value . | 28. | Friction TesterModel No. : TextechnoManufacturer : ReibwertwaageMade in : GermanyFunction :1. To measure co-efficient of friction . | 29. | Grey Scale ISO 105-A03 : 1993 BSEN 20105-A03 : 1995 BS 1006-A03 : 1990 SDC Standard Methods 5th Edition A03 Grey Scale (Two scale) For : >Assessing staining . >Assessing color change . | 30. | Matching BoothLIGHT BOX 9 (Supervision 2C)(Visual color matching chamber)Model No. : G0201Manufacturer : Mag EngineersMade in : India Function :1. Checking color difference under different light source. Like D65 ,TL84 , UV , CWF etc. | 31. Matching BoothLIGHT BOX (Century Faith)(Visual color matching chamber)Model No. : 70080Function :1. Checking co lor difference under different light source. Like D65 ,TL84 , UV , CWF etc. | 32. | Q – SUNXenon Test ChamberLight Fastness TesterModel No. : B02| Recipe formulation Buyer can give fabric sample or colour code. So at first the colour is to identify if the buyer gives colour code or pantone number. It is easier to formulate recipe by spectrophotometer from colour code or pantone number because they are very specific. But if it is fabric sample then with the help of spectrophotometer several numbers of recipes are to formulate.Process flow chart of lab Swatch from buyer Checking the quality parameter Recipe Formulation Record Matching Visually Recipe Correction Exact matching with swatch Two or more options of Lab-dip send to buyer Approved Not Approved Go for production Matching Re-Lab-dip Chemicals used in lab For Cotton Scouring and Bleaching: YARN| Name| Amount| Function| Cottoclarin-KD| 1. 25 g/l| Soaping agent| Stabilol-ZM| 0. 4 g/l| Peroxide killer| Securon-C| 0. 75 g/l| Sequestering agent| Caustic| 2 g/l| Scouring agent| H2O2| 4. 0 g/l| Bleaching agent|Acetic acid| 1 g/l| Neutralization| Name| Amount| Function | Reduzin-ABC| 2 g/l| Wetting agent| Jinsofter-BSK| 0. 75-1. 5 g/l| Anticreasing agent| Jintexalate-SQ117| 1 g/l| Sequestering agent| Contavan-GAL| 0. 75 g/l| Stabilizer| Caustic| 2. 5 g/l| Scouring agent| H2O2| 4. 5 g/l| Bleaching agent| Fabric| For Cotton dyeing| Name| Amount| Function| Ladiquest-1097| 1 g/l| Sequestering agent| Jinsofter-BSK| 1 g/l| Anticreasing agent| Jinlev CL-225| 1. 5 g/l| Levelling agent| Formic Acid| 0. 1 g/l| Controlling pH| Glauber salt | | For Fixation| Soda| | For fixation ; contolling pH| For Washing| Name| Amount| Function|Jintexalate-QSE| 1. 5 cc| Soaping agent| Cotoblance-NSR| 1. 5 cc| Soaping agent| Acetic Acid| | Neutralization| For Polyester Dyeing| Name| Amount| Function| Dyapol-AB| 1 g/l| Acid donar| Setamol-WS| 0. 75 g/l| Dispersing agent| Jinlev-RLF| 0. 5 g/l| Levelling agent| Acetic acid| 0. 6 g/l| C ontrolling pH| Deragal-SFD| 1 g/l| Buffering + Dispersing agent| Domapol B. Conc. | 2 g/l| Buffering + Dispersing agent| For Reduction Clearing| Name| Amount| Function| Hydrose| 2 g/l| Reducing agent| Caustic| 2 g/l| Reducing agent| Salt-Soda Chart Amcazol Shade %| Up to 0. 05| 0. 05-0. 075| 0. 075-0. 10| 0. 1-0. 2| 0. 2-0. 3| 0. 3-0. | 0. 4-0. 5| 0. 5-0. 6| Salt(g/l)| 2| 3| 5| 7| 9| 12| 16| 20| Soda(g/l)| 2| 3| 4| 5| 7| 8| 9| 10| Shade %| 0. 6-0. 7| 0. 7-0. 8| 0. 8-0. 9| 0. 9-1. 0| 1. 0-1. 20| 1. 2-1. 4| 1. 4-1. 6| 1. 6-1. 8| Salt(g/l)| 22| 24| 26| 28| 32| 34| 38| 42| Soda(g/l)| 11| 12| 12| 13| 13| 14| 15| 16| Shade %| 1. 8-2. 0| 2. 0-3. 0| 3. 0+| Salt(g/l)| 46| 50| 60| Soda(g/l)| 18| 20| 20| Bezctive Shade %| ; 0. 1| 0. 1-0. 5| 0. 5-1. 0| 1. 0-2. 0| 2. 0-3. 0| 3. 0-4. 0| 4. 0-5. 0| Salt(g/l)| 10| 20| 30| 40| 50| 60| 70| Soda(g/l)| 5| 10| 15| 20| 20| 25| 25| Shade %| 5-6| 6;| Salt(g/l)| 80| 90| Soda(g/l)| 25| 25| Remazol Shade %| ;0. 1| 0. | Up to 1. 0| Up to 2. 0%| 2-3%| 3-5%| Sal t(g/l)| 20| 30| 40| 50| 60| 80| Soda(g/l)| 3| 3| 10| 13| 15| 20| Imcozine Shade %| ;0. 5| 0. 5-1. 0| 1. 0-2. 0| 2. 0-3. 0| ;3. 0| Salt(g/l)| 30| 45| 60| 70| 90| Soda(g/l)| 8| 12| 18| 20| 25| Cibacron Shade %| ;0. 01| 0. 01-0. 05| 0. 05-0. 1| 0. 1-0. 5| 0. 5-1. 0| 1. 0-2. 0| 2. 0-3. 0| Salt(g/l)| 20| 20| 20| 25| 30| 50| 60| Soda(g/l)| 6| 6| 6| 8| 10| 12. 5| 15| Shade %| 3. 0-4. 0| 4. 0+| Salt(g/l)| 60| 80| Soda(g/l)| 17. 5| 20| Kimsoline Shade %| Up to 0. 05| 0. 05-1. 0| 1. 0-1. 5| 1. 5-3. 0| 3. 0-4. 0| 4-6| 6-8| Above 8| Salt(g/l)| 20| 30| 40| 50| 55| 60| 80| 100|Soda(g/l)| 10| 13| 15| 18| 20| 20| 20| 20| Synozol Shade %| Below 0. 1| 0. 1-0. 5| 0. 5-1. 0| 1. 0-2. 0| 2. 0-3. 0| 3. 0+| Salt(g/l)| 10| 20| 30| 40| 50| 60| Soda(g/l)| 8| 10| 13| 16| 18| 20| Levafix CA Shade %| ;0. 1| 0. 1-0. 5| 0. 5-1. 0| 1. 0-2. 0| 2. 0-3. 0| 3. 0-5. 0| ;5. 0| Salt(g/l)| 15| 20| 35| 50| 60| 80| 80| Soda(g/l)| 5| 7| 10| 13| 15| 20| 20| Drimarine CL Shade %| ;0. 5| 0. 5-1. 0| 1-1. 5| 1. 5-2| 2. 0-3| ;3| Sa lt(g/l)| 20-50| 60| 65| 70| 80| 80| Soda(g/l)| 5| 10| 15| 18| 20| 20| Drimarine EX-XN Shade %| ;1. 0| 1. 0-3. 0| 3. 0 above| Salt(g/l)| 20-40| 40-60| 60-80| Soda(g/l)| 5. -10| 10-15| 15-20| Revatol S| 1. 0-2. 0| 1. 0-2. 0| 1. 0-2. 0| Sumifix Shade %| 0. 1| 0. 1-0. 3| 0. 3-0. 6| 0. 6-1. 0| 1. 0-1. 5| 1. 5-3. 0| 3. 0+| Salt(g/l)| 3| 7| 10| 15| 20| 40| 50| Soda(g/l)| 10| 10| 15| 15| 20| 20| 20| Dychufix Shade %| 0. 05-0. 1| 0. 1-0. 5| 0. 5-1. 0| 1. 0-2. 0| 2. 0-3. 0| 3. 0-4. 0| 4| Salt(g/l)| 20| 30| 40| 50| 60| 70| 80| Soda(g/l)| 10| 15| 20| 20| 20| 20| 20| Shade %| 3. 0-4 | 4. 0+| Salt(g/l)| 60| 80| Soda(g/l)| 17. 5| 20| Sequence of dyeing 100% cotton fabric in lab Select bleach fabric (5 gm) Recipe making Select dyes Dyeing Hot wash Neutralization Soaping Cold washDrying Match with standard sample yes Bulk production Sequence of dyeing Polyester/Cotton fabric in lab Select bleach fabric ( 5 gm ) Carbonizing of cotton part Fabric weight measure with carbonized part Recipe making Selec t dyes Dyeing of polyester part Matching dyed PES part with standard yes Dyeing of cotton part Hot wash Neutralization Soaping Cold wash Drying Total sample match with standard sample yes Bulk production Calculation: Usually following calculations are followed – Recipe % ? Sample Weight ** Dye Solution = (cc). Stock solution % g/L ? Total Liquor ** Salt (cc) Stock solution ? 1000 g/L ?Total Liquor ** Soda Solution = (cc). Stock solution ? 1000 g/L ? Total Liquor ** Chemicals = (cc). Stock solution ? 1000 Problems for lab-dip : -Shade variation ( major problem ) . -Soda or alkali spot come. -Metamerism problem . Problems overcome by : -Dye adjust between std. and lab-dip. -Accurate dyes and chemical measure. -By shading (additional way). -By stripping. Samples send to buyer: Now for every separate sample dyeing with separate recipe are send to buyer for approval. The buyer approves one sample and the recipe of that approved sample is now send to dyeing section. Batching Sectio n Batch Section Batching:Batching preparation is the process where visually inspected grey fabrics are divided into different batches with reasonable quantity in order to make them suitable for the further operation. During batching the following factors are considered: 1 1. Order priority 2 2. Yarn type 3 3. Yarn dyed/Color (Light-medium/Deep) 4 4. Fabric quantity 5 5. Capacity of available machines 6 Proper batching criteria: To use maximum capacity of existing dyeing m/c To ensure every dyeing m/c running in full production. To minimize the m/c washing time or preparation time. To keep the no of batch as less as possible for same shade, etc.Batch Preparation Process sequence of Batch preparation receive batch card from Grey In-charge Make the priority as per dyeing plan Take one specific Batch card. Check the availability of fabric Take required quantity of body fabric from store Make required no. of Rope maintaining equal length Take collar/cuff as per size, keep the total weigh t. Distribute the collar /cuff or Rib in each rope equally unsure equal length Stitch the fabric Write down the weight against roll no. in the back side of the Batch Card Write the total weight in Batch Card Put signature ; date Fill the production report formSewing:â€Å"Sewing means stitching†. The necessity of sewing: -To adjust the rolls by sewing which is adjusted with hand by knotting in turning before sewing? -They fulfill the sewing row in process Route Card and fulfill the particular sewing chart then it goes for dyeing. Turning: Normally turning is done for those fabrics which are not same in both face ; back to protect the face side of fabric from any dust, spot, other color, machine corrosion or any visual or physical disturbance. The machine by which counting of rolls ; face/back side of fabric is opened is called turner machine. Fabric Dyeing SectionLayout and evacuation plan of fabric dyeing section Fabric Dyeing Machine Specification No. of Sample Dyeing Machi ne: 10 No. of Bulk Dyeing Machine: 17 List of Sample Dyeing Machine Sl No| Machine type| Specification| 01. | Fong’s-20| M/C NO. : ALLFIT-25SER. NO. : 24009628CERT. NO. :HKG-930003/2YEAR BUILT: 1999DESIGN CODE: BS 55001997 CAT2DESIGN PRESSURE: 400 KPaDESIGN TEMPERATURE : 140 °CHYDRAULIC TEST PRESSURE: 650 KPaTEST DATE : 1999SAFETY VALVE SET : 400 KPaTESTED BY LLYODS COMPANY, Fongs Manufacturer : Fongs National Engineering (Shenzen) Co.Limited. Manufacturing Country : TaiwanCapacity: 20 Kg | 03. | Fong’s-30/2| M/C NO. : ALLFIT-30SER. NO. : 27013515CERT. NO. :HKG-0230011/4YEAR BUILT: 2002DESIGN CODE: BS 55001997 CAT2DESIGN PRESSURE: 400 KPaDESIGN TEMPERATURE : 140 °CHYDRAULIC TEST PRESSURE: 650 KPaTEST DATE : 2002SAFETY VALVE SET : 400 KPaTESTED BY LLYODS COMPANY , Fongs Manufacturer : Fongs National Engineering (Shenzen) Co. Limited. Manufacturing Country : TaiwanCapacity: 30 Kg| 04. | Fong’s-120| M/C NO. : ALLFIT-120SER. NO. : 25010850CERT. NO. HKG-030008/3 7YEAR BUILT: 2000DESIGN CODE: BS 55001997 CAT2DESIGN PRESSURE: 400 KPaDESIGN TEMPERATURE : 140 °CHYDRAULIC TEST PRESSURE: 650 KPaTEST DATE : 2000SAFETY VALVE SET : 400 KPaTESTED BY LLYODS COMPANY , Fongs Fongs National Engineering (Shenzen) Co. Limited. Manufacturing Country : TaiwanCapacity: 120 Kg| 06. | HAF-30| CAPACITY:30 KGSTOTAL POWER:9 KWWORKING MEDIUM : WATER 240Lit. DATE : 2005. 4MFG. NO. : 2005-HAF-30-1MODEL : TGRU-HAF-1-30BODY MAXIMUM WORKING PRESSURE : 4 KG/cm? TOTAL WORKING TEMP. : 140 °CHEATER MAXIMUM WORKING PRESSURE: S/T-5/4KG/cm?MAXIMUM WORKING TEMP. : S/T 158 °C/140 °CNDT CLASS : RT 20%Manufacturer : TONG GENG ENTERPRISE CO. LTD Manufacturing Country : TAIWAN| 07. | ATHENA-50/1| Brand Name : Athena by SCLAVOSCountry of Origin : GreeceSerial No. : 03-1B-2931Year Built : 2009Design Code : ASME vii DivSpecial Features : AQUACHORN Twin Soft Flow SystemMaximum work pressure (MPa): . 28Testing pressure (MPa):0. 40Maximum working Temperature ( °C): 142 Patent No . : 5. 621. 937Capacity : 50 KgElectronic Information : Machine Voltage (V) : 3? 380 ACControl Voltage (V) : 24 DCTotal Horse Power (HP) : 9 KW| 08. ATHENA-50/2| Brand Name : Athena by SCLAVOSCountry of Origin : GreeceSerial No. : 03-1B-2932Year Built : 2009Design Code : ASME vii Div-1Special Features : AQUACHORN Twin Soft Flow SystemMaximum work pressure (MPa): . 28Testing pressure (MPa):0. 40Maximum working Temperature ( °C): 142 Patent No. : 5. 621. 937Capacity : 50 KgElectronic Information : Machine Voltage (V) : 3? 380 ACControl Voltage (V) : 24 DCTotal Horse Power (HP) : 9 KW | 09. | KRSNA(10 kg)/1| COUNTRY OF ORIGIN : AHMEDABAD , INDIATEL: +91-79-22818537 TELE FAX: +91-79-22823093/27680745EMAIL: [email  protected] com/infokrsnadyeingmachine. om Website: http://www. krsnadyeingmachine. com Serial No. 12/38 Year:10/09-10 Model :ATM| 10. | KRSNA(10 kg)/2| COUNTRY OF ORIGIN : AHMEDABAD , INDIATEL: +91-79-22818537 TELE FAX: +91-79-22823093/27680745EMAIL: [email  protected] c om/infokrsnadyeingmachine. com Website: http://www. krsnadyeingmachine. com Serial No. 13/38Year :10/09-10Model: ATM| Bulk production dyeing Machine Sr. No. | Machine type| Specification| 01. | ATH-1/1| Brand Name : Athena by SCLAVOSCountry of Origin : ATHENS-GREECEM/C Capacity : 250 KgNo. of Nozzle : 1Serial No. : 04-1A-2/11Design Code : ASME VIII DIV. Maximum work pressure (bar): 2. 8Testing pressure (bar):4. 0Maximum working Temperature ( °C): 142 Patent No. : 5-621-937Year of construction : 2005Special Features : AQUACHORN Twin Soft Flow SystemElectronic Information : Machine Voltage (V) : 3? 380 ACMax. Current (A) : 33Control Voltage (V) : 24 DCTotal Horse Power (HP) : 19KW| 02. | ATH-1/2| Brand Name : Athena by SCLAVOSCountry of Origin : ATHENS-GREECEM/C Capacity : 250 KgNo. of Nozzle : 1Serial No. : 04-1A-250Design Code : ASME VIII DIV. 1Maximum work pressure (bar): 2. 8Testing pressure (bar):4. 0Maximum working Temperature ( °C): 142 Patent No. 5-621-937Year of construct ion : 2004Special Features : AQUACHORN Twin Soft Flow SystemElectronic Information : Machine Voltage (V) : 3? 380 ACMax. Current (A) : 42Control Voltage (V) : 24 DCTotal Horse Power (HP) : 24| 03. | ATH-1/3| Brand Name : Athena by SCLAVOSCountry of Origin : ATHENS-GREECEM/C Capacity : 250 KgNo. of Nozzle : 1Serial No. : 04-1A-2874Design Code : ASME VIII DIV. 1Maximum work pressure (MPa): 0. 28Testing pressure (MPa): 0. 40Maximum working Temperature ( °C): 142 Patent No. : 5-621-937Year of construction : 2007Special Features : AQUACHORN Twin Soft Flow SystemElectronic Information : Machine Voltage (V) : 3? 80 ACMax. Current (A) : 42Control Voltage (V) : 24 DCTotal Horse Power (HP) : 24| 04. | ATH-1/4| Brand Name : Athena by SCLAVOSCountry of Origin : ATHENS-GREECEM/C Capacity : 250 KgNo. of Nozzle : 1Serial No. : 04-1A-2868Design Code : ASME VIII DIV. 1Maximum work pressure (MPa): 0. 28Testing pressure (MPa):0. 40Maximum working Temperature ( °C): 142 Patent No. : 5-621-937Year o f construction : 2007Special Features : AQUACHORN Twin Soft Flow SystemElectronic Information : Machine Voltage (V) : 3? 380 ACMax. Current (A) : 73 AControl Voltage (V) : 24 DCTotal Horse Power (HP) : 24| 05. ATH-2/1| Brand Name : Athena by SCLAVOSCountry of Origin : ATHENS-GREECEM/C Capacity : 500 KgNo. of Nozzle : 2Serial No. : 04-2A-2870Design Code : ASME VIII DIV. 1Maximum work pressure (MPa): 2. 80Testing pressure (MPa):0. 40Maximum working Temperature ( °C): 142 Patent No. : 5-621-937Year of construction : 2007Special Features : AQUACHORN Twin Soft Flow SystemElectronic Information : Machine Voltage (V) : 3? 380 ACMax. Current (A) : 59 Control Voltage (V) : 24 DCTotal Horse Power (HP) : 35| 06. | ATH-2/2| Brand Name : Athena by SCLAVOSCountry of Origin : ATHENS-GREECEM/C Capacity : 500 KgNo. f Nozzle : 2Serial No. : 04-2A-2869Design Code : ASME VIII DIV. 1Maximum work pressure (MPa): 0. 28Testing pressure (MPa):0. 40Maximum working Temperature ( °C): 142 Patent No. : 5-62 1-937Year of construction : 2007Special Features : AQUACHORN Twin Soft Flow SystemElectronic Information : Machine Voltage (V) : 3? 380 ACMax. Current (A) : 59 Control Voltage (V) : 24 DCTotal Horse Power (HP) : 35| 07. | ATH-3/1| Brand Name : Athena by SCLAVOSCountry of Origin : ATHENS-GREECEM/C Capacity : 750 KgNo. of Nozzle : 3Serial No. : 04-3A-2607Design Code : ASME VIII DIV. 1Maximum work pressure (bar): 2. Testing pressure (bar):4. 0Maximum working Temperature ( °C): 142 Patent No. : 5-621-937Year of construction : 2004Special Features : AQUACHORN Twin Soft Flow SystemElectronic Information : Machine Voltage (V) : 3? 380 ACMax. Current (A) : 68Control Voltage (V) : 24 DCTotal Horse Power (HP) : 48| 08. | ATH-3/2| Brand Name : Athena by SCLAVOSCountry of Origin : ATHENS-GREECEM/C Capacity : 750 KgNo. of Nozzle : 3Serial No. : 04-3A-2880Design Code : ASME VIII DIV. 1Maximum work pressure (MPa): 0. 28Testing pressure (bar):4. 0Maximum working Temperature ( °C): 142 Patent No . 5-621-937Year of construction : 2007Special Features : AQUACHORN Twin Soft Flow SystemElectronic Information : Machine Voltage (V) : 3? 380 ACMax. Current (A) : 73Control Voltage (V) : 24 DCTotal Horse Power (HP) : 47| 09. | ATH-6| Brand Name : Athena2â„ ¢ by SCLAVOSCountry of Origin : ATHENS-GREECEM/C Capacity : 1500 KgNo. of Nozzle : 6Serial No. : 04-6A-2907Design Code : ASME VIII DIV. 1Maximum work pressure (MPa): 0. 28Testing pressure (bar):0. 40Maximum working Temperature ( °C): 142 Patent No. : 5-621-937Year of construction : 2009Special Features : AQUACHORN Twin Soft Flow SystemElectronic Information : Machine Voltage (V) : 3? 80 ACMax. Current (A) : 134Control Voltage (V) : 24 DCTotal Horse Power (HP) : 88| 10. | AA-3/1| Brand Name : Athena by SCLAVOSCountry of Origin : ATHENS-GREECEM/C Capacity : 750 KgNo. of Nozzle : 3Serial No. : 06-3A-2963Type : DSL 750 FMaximum working Temperature ( °C): 98Pmax. : 3. 55 KWVmax. : 3? 440 volt 50/60 HzPatent No. : 5-621-937Year o f construction : 2009Electronic Information : Machine Voltage (V) : 3? 380 ACMax. Current (A) : 75Control Voltage (V) : 24 DCTotal Horse Power (HP) : 48| 11. | AA-3/2| Brand Name : Athena by SCLAVOSCountry of Origin : ATHENS-GREECEM/C Capacity : 750 KgNo. f Nozzle : 3Serial No. : 06-3A-2964Type : DSL 750 FMaximum working Temperature ( °C): 98Pmax. : 3. 55 KWVmax. : 3? 440 volt 50/60 HzPatent No. : 5-621-937Year of construction : 2009Electronic Information : Machine Voltage (V) : 3? 380 ACMax. Current (A) : 75Control Voltage (V) : 24 DCTotal Horse Power (HP) : 48| 12. | S. HT-2| Brand Name : Athena by SCLAVOSCountry of Origin : ATHENS-GREECEM/C Capacity : 360 KgNo. of Nozzle : 2Serial No. : 03-2A-2193Design Code : ASME VIII DIV. 1Maximum work pressure (bar): 3. 5Testing pressure (bar):5. 3Maximum working Temperature ( °C): 140 Patent No. 5-621-937Year of construction : 1993Special Features : AQUACHORN Twin Soft Flow SystemElectronic Information : Machine Voltage (V) : 3? 380 ACMa x. Current (A) : 44Control Voltage (V) : 24 DCTotal Horse Power (HP) : 25/185| 13. | S. HT-3/1| Brand Name : Athena by SCLAVOSCountry of Origin : ATHENS-GREECEM/C Capacity : 540 KgNo. of Nozzle : 3Serial No. : 03-3A-22/1Design Code : ASME VIII DIV. 1Maximum work pressure (bar): 3. 5Testing pressure (bar):5. 3Maximum working Temperature ( °C): 140 Patent No. : 5-621-937Year of construction : 1993Special Features : AQUACHORN Twin Soft Flow SystemElectronic Information : Machine Voltage (V) : 3? 80 ACMax. Current (A) : 50Control Voltage (V) : 24 DCTotal Horse Power (HP) : 36/26. 25 KW| 14. | S. HT-3/2| Brand Name : Athena by SCLAVOSCountry of Origin : ATHENS-GREECEM/C Capacity : 540 KgNo. of Nozzle : 3Serial No. : 03-3A-22/2Design Code : ASME VIII DIV. 1Maximum work pressure (bar): 3. 5Testing pressure (bar):5. 3Maximum working Temperature ( °C): 140 Patent No. : 5-621-937Year of construction : 1993Special Features : AQUACHORN Twin Soft Flow SystemElectronic Information : Machine V oltage (V) : 3? 380 ACMax. Current (A) : 50Control Voltage (V) : 24 DCTotal Horse Power (HP) : 36/26. 25 KW| 15. | S.HT-4/1| Brand Name : Athena by SCLAVOSCountry of Origin : ATHENS-GREECEM/C Capacity : 720 KgNo. of Nozzle : 4Serial No. : 03-4A-2305Design Code : ASME VIII DIV. 1Maximum work pressure (bar): 3. 5Testing pressure (bar):4. 0Maximum working Temperature ( °C): 140Patent No. : 5-440-771Year of construction : 2000Special Features : AQUACHORN Twin Soft Flow SystemElectronic Information : Machine Voltage (V) : 3? 400 ACMax. Current (A) : 64Control Voltage (V) : 24 DCTotal Horse Power (HP) : 39| 16. | S. HT-4/2>720| Brand Name : Athena by SCLAVOSCountry of Origin : ATHENS-GREECEM/C Capacity : 720 KgNo. of Nozzle : 4Maximum work pressure (bar): 3. Testing pressure (bar):4. 0Maximum working Temperature ( °C): 140Special Features : AQUACHORN Twin Soft Flow SystemTotal Horse Power (HP) : 40| SPECIAL FEATURES OF SCLAVOS MACHINE : Twin soft flow system: The main pump liqour flow in sclavos is distributed into two nozzles achieving minimum pressure. The technical solution results in a perfact fabric transport ; liqour penetration at a very low nozzle pressure. The patented plaiting system ensures good storage of the fabric with the uniqe liqour bypass system diverting the biggest amont of liqour out side the chamber. This avoids abrasion of fabric surface.Advantages: * Less compacting system * Extended fabric liqour exchange * Reorientation of the rope at every turn * Vertical plaiting Aquacron: Revolutionary continuous wash system, diverting contaminated liquor at the exit of TSF outside the j box to a drain pipe. A continuous flow of either preheated (via Sclavos Heat Recovery) or cold water turns Sclavos into a virtually nonstop operation dyeing machine. Drainage of contaminated liquor via the liquor bypass avoids liquor dropping on to the stored fabric. High liquor renewal speed caused by very low liquor level during washing. Advantages: 1. Efficient wa shing effect. . Less water consumption. 3. Less temperature shocks when filling with cold water. 4. Precise calculation of water consumption. FULLY AUTOMATIC FUNCTION: * Automatic salt ; soda dosing system. * Automatic chemical injection system. * Automatic heat exchanging process. Ciba new process: Bleach+Enzyme Machine filling with water at normal Temperature Fabric loaded at normal temperature (36-400C) Chemicals {Contipon S (10%solution), Jintex Stab, Antisil Conz Jinsofter BSK , Ablutex-AP-750 (42% Soln)} Dozing at 60 0C ; Run for 4 min H2O2 (35% Soln) is added at 600C within 3-4 minute NaOH is added for 7 min at 700CRun time 20 min at1100C Cooling at 95-80 0C ; then aquachron is done for 12 min Absorbency test is done. Water is leveled Acetic Acid is added at 550C runtime 6 min Per oxide Killer (Raduzin-THN (50% Soln)) is added at 55C for 10 min, Per oxide is checked (if H2O2 = O) PH is Checked (PH=4. 8) Enzyme ( Retrocell PLX-TRA) at 550C run for 45 min Aquachron is done at 5 50C for 5 min Hot wash at 80 C for 20 min Aquachron is done at 550C for 5 min Water is leveled Dyeing (ciba new process): Dyeing auxiliaries(Jinlev-CL225, Antisil conz) and acitic acid /RL)is added at 600C for 30 min PH is Checked (PH= 6-6. 5 ) Runtime 20 minDyes is dosing at 600C 20min added at run for 10 min. Glauber salt dosing at 600C for 30 min and run for 20 min Soda dosing at 600C for 20 min [1st part] Soda dosing at 600C for 20 min[2nd part] After 5 min shade is checked If shade is not â€Å"OK† then it’s checked after every 5 min until matching If shade is â€Å"OK† Liquor is drained Water filling and aquacron is done for 25 min Soaping : Acid wash is done at 600C and run for 6 min for neutralization PH is checked (acidic condition) Soaping agent (Jintexalate QSE) is added at 950C ; run for 12 min Aquachron is done at 70 C for 5 min Hot wash at 900C run for 9 minAquachron is done for 10 min Drain out Nova Ciba Fixing: Fixing agent (WER)is added for 10 m in at 400C and run for 10 min Acidic acid +Dosssing Bevsoft-CF +Jinsofter –WCS is added for 10 min at 400C ; run for 20 min Unload Finishing Section Lay-out of the Finishing section DEWATERING ; SLITTING M/C Production Officers Room FINISHED Goods STENTER MACHINE – 02 STENTER MACHINE – 03 STENTER MACHINE -01 OFFLINE QUALITY CONTROL ROOM COMPACTORM/C- 03 LAFER COMPACTOR M/C-01 DEWATERING-2 DEWATERING-1 DRYER MACHINE FINISHED Goods FINISHED Goods COMPACTOR M/C C- 02 CALANDER M/C RAISING M/C SLITTING M/CSUEDING M/C Online QC Officers Table Finishing: After dyeing knit fabric is required to finish. During dyeing all knit fabric are dyed in tubular form. According to buyer’s requirement knit fabric are finished in open form or tubular form. Dyed Fabric from Dyeing Department Shade check Flow chart of finishing process Dewatering Open width Tubular form Dewatering Drying Slitting Calendering ; compactor Stentering/Dryer Final Inspection Open compactor Packing F inal Inspection Delivery Packing Delivery Machines of Finishing section M/C No. M/C Name| M/C specification| 01. | Hydro-1Dewatering M/C -1| SANTEX AG CH-9555 TobelControl panel Inspected by Santex agType: SANTASTRETCH 140Com. Nr. : 3887Electr. diagr. Nr. : 95-3887Electr. Voltage: 3? 380V+N+E 230V 50 HzConnected Load: 8KWYear of Construction: 1995Made in Switzerland| 02. | Hydro-1Dewatering M/C -1| SANTEX AG CH-9555 TobelControl panel Inspected by Santex agType: Santastretch PlusCom. Nr. : 5872Electr. diagr. Nr. : 03-5872Electr. Voltage: 3? 400+PEN 230V 50 HzConnected Load: 20 KWYear of Construction: 2003 Made in Switzerland| 03. | Slitting| bianco ® S. P. AMACCHINE TESSILIVial Industria, 4 -12051ALBA CN ITALIATel. 173/440402-(5 line r. a. )Fax:0173/34872-0173/297000-Telex-212357 BIANCOMACHINE: Linea TaglierinaSERIAL NO. : 960112CONSTRUCTION YEAR : 1996VELOCITA’MAX(m/min. ) : | 04. | Dewatering+Slitting| bianco ® S. P. AMACCHINE TESSILIVial Industria, 4 -12051ALBA CN ITAL IATel. 0173314111Fax : 01734872 Email : bianco-spa. comMACHINE: Linea TaglierinaSERIAL NO. : M04639-022215CONSTRUCTION YEAR : 2006VELOCITA’MAX(m/min. ) : 900| 05. | Dryer| LK ; LH CO. , LTD. TAIWAN TAIFEI| 06. | Calendering ; Compacting| SANTEX AG CH-9555 TobelControl panel Inspected by Santex agType: SANTASPREAD 140Com. Nr. : 3889Electr. diagr. Nr. 95-3889Electr. Voltage: 3? 380V+N+E 230V 50 HzConnected Load: 8KWYear of Construction: 1995 Made in Switzerland| 07. | Stentering m/c1| LK ; LH CO. , LTD. | 08. | Stentering m/c-2| ICOMATEXTERRASS(SPAIN)TIPO DE MAQUINA : FL-3No. DE FABRICATION: 481ANO DE FABRICATION: 2005| 09. | Stentering m/c-3| ICOMATEXTERRASS(SPAIN)| 10. | Compacting m/c-1| FERRAROCONSTRUZIONI MECCANVia Busto Arsuzu,12021015 Lonate FozzoloITALYCOMPTEX7RA-2600 3957Year of Construction: 1998| 11. | Compacting m/c-2| TUBETEXC 2500 compactor| 12. | Compacting m/c-3| LaferSPA MACCHINE TESSILISEDE LEGALE,UFFICI E STABILIMENTO Via Laga di Garda no. 8 Z. I 36015-SCHIO (VI) ITALYMACCHINA : KSA 500ALTEZZA TAVOLA : 2600MATRICOLA : 10KS02767ANNO : 2009| 13. | Sueding m/c| LaferULTRASOFT-YTexen s. r. l. factory automationVia lago di vico , 4B 36015 schio (VI) Italytel : +39. 0445. 694101 fax. : 39. 0045. 694120www. laferspa. com/[email  protected] comSERIAL NO. /DRAWING NO. : N ° 10GSY2355PHASES NO. : N ° 3VOLTAGE : v 400FREQUENCY : Hz 50NOMINAL CURRENT : A 100INTERRUPTION CAPABILITY : KA 25| 14. | Raising m/c| Mario CostaM/C Type : MC-20/24Serial No. : 8969Power Supply : 3? 400 V 50/60HzYear : 2007 Month : 11Max. Power : 69 KWTensione asiliari : 24/5 VDCAux.Power Supply : 230/24 KWMade in Italy | Factor Consideration: Shrinkage control: -Shrinkage is controlled by proper over feeding. -To apply less or more over feed speed fabrics reduce along to length and increase along to width. Maximum 70 – 75% shrinkage is controlled by using it. GSM Control: -GSM is also controlled by applying proper over feeding speed. -If over feed is more than G SM is also more. -If Over feed speed is less then GSM is also is less. -If Dia is more than GSM of the fabric will less. -If Dia is less than the GSM of the fabric will more. N. B: If GSM of the fabric is OK then shrinkage is also OK.Dia Control: -Dia is controlled by dia controlling meter scale. -If any fault, GSM of the fabric is reduced then to increase the GSM of the fabric dia will have to be reduced (2 – 3) inch. -If Over feed speed is more than Dia of the fabric will be more. -If Over feed speed is less then Dia of the fabric will be less. -If length is more than width of the fabric is reduced. -If length is less then width of the fabric is more. N. B: Fabric speed is controlled on the fabric dia. Here, Dia less or More fully depends on yarn count and buyer order. Dia is done less or more by using expander rod.Finishing section is divided into two section, they are: -Open line -Tube line Production parameters: 1 1. Squeeze pressure 2 2. Fabric speed 3 3. Fabric tension 4 4. Temperature 5 5. Fabric diameter 6 6. Fabric GSM 7 7. Fabric shrinkage 8 8. Air pressure 9 9. Steam pressure 10 10. Softener Types of finishing: 1) Chemical finishing: * Chemical reaction of auxiliaries with fibers. * Application of the handle modifying products / additives. 2) Mechanical finishing: * Mechanical treatment with machines. The machines that are used in open line that are given bellow: 1. Slitting m/c 2. De-watering m/c 3. Stenter 5. CompactorThe machines that are used in tube line that are given bellow: 1. De-watering m/c 2. Dryer 3. Calendering ; Stentering Other machines: 2. Sueding m/c 3. Raising m/c Dewatering m/c: 01 After finishing the dyeing process from the dyeing machine then the fabrics are ready for de-watering. This is the process to remove the water from the fabric completely by squeezing. This is the main function of the de-watering machine. But here also control the some important factor of the fabric quality Function: 1. Reduce water content. 2. A pply chemicals specially to make the fabric soft. 3. Open the fabric from the rope form. . Shrinkage is controlled by overfeed mechanism Slitting m/c: 01 M/c name: bianco ® S. P. A Serial Nr. : 960112 Construction year: 1996 Highest Speed: 100M/min Running speed: 60-70 M/min Normal speed: 40-50 M/min N. B. : * Photocell detects Needle Mark ; according to the needle mark tube fabric is cut by the plate. * Fabric Diameter is set by Basket. * Fabric is spreaded by the basket. Purpose of the m/c: * To open the fabric from tubular form to open width form * Fabric is cut according to the needle mark. Dryer m/c: Drying: Drying is defined as a process where the liquid portion is evaporated from the fabric.Curing: Curing can be defined as a process following addition of a finish to textile fabrics in which materials are heated for a short time in elevated temperature to effect a chemical reaction Functions: 1. To dry the fabric with the help of steam 2. To control the shrinkage 3. To prepa re the fabric for next subsequent process 4. To dry fabric without tension Figure: Dryer Main parts of the machine: 1. Heating chamber 2. Blower 3. Synthetic blanket as a conveyor 4. Folder 5. Exhaust fan Heating system: * Gas fired Checking parameters: * Shade Check * Width check * Weight check * Compaction check Fault check : Operator checks – * Knitting faults * Spinning faults * Dyeing faults * Other faults * Edge check Yarn Dyeing Section Yarn dyeing machines and their specification SL No. | Machine Type| Spindle No. ;Bobbin no. | M/C Specification| 01. | Lab m/c (AL-6A)| Spindle No. : 016 Bobbin / SpindleTotal Bobbin=(1*6) =6| HEAT EXCHANGERSER NO. : 2901587-1CER. NO. : HKG. 043003/92DESIGN CODE: PD55002003CAT2YEAR BUILT: 2004CAPACITY: 6 KG JACKET SHELLDESIGN PRESSURE: 400 KPa 520 KPaDESIGN TEMP. : 50 °C 140 °CHAYDRAULIC PR . 600 KPa 800 KPa TEST DATE : 2004 2004SAFETY VALVE SET: 400KPa 520kpaHEATING/COOLING MEDIUM: WATERTESTED BY LLYOYDS REGISTERFONGS NATIONAL ENG. (SHENZEN) CO. LTD| 02. | Lab m/c (AL-6B)| Spindle No. :016 Bobbin / SpindleTotal Bobbin=(1*6) =6| HEAT EXCHANGERSER NO. : 2901587-1CER. NO. : HKG. 043003/92DESIGN CODE: PD55002003CAT2YEAR BUILT: 2004CAPACITY: 6 KG JACKET SHELLDESIGN PRESSURE: 400 KPa 520KPaDESIGN TEMP. : 50 °C 140 °CHAYDRAULIC PR . 600 KPa 800 KPa TEST DATE : 2004 2004SAFETY VALVE SET: 400KPa 520kpaHEATING/COOLING MEDIUM: WATERTESTED BY LLYOYDS REGISTERFONGS NATIONAL ENG. (SHENZEN) CO. LTD| 03. | CH-10/1| Spindle No. :033 Bobbin / SpindleTotal Bobbin=(3*3) =9 | CAPACITY: 10 KGTOTAL POWER: 6 KWWORKING MEDIUM (WATER): 80 Lit. DATE : 2006. 11MFG. NO. : 2006-CH-10-3MODEL : TGCH-10BODY OPER. PRESSURE : 4 KG/cm? MAXIMUM WORKING TEMP. : 140 °CHEATER OPER. PRESSURE: S/T4/10KG/cm? MAXIMUM WORKING TEMP. :S/T140 °C/183 °CNDT CLASS : RT 20%TONG WU PRECISION MACHINERY CO.LTDTAIWAN| 04. | CH-10/2| Spindle No. :033 Bobbin / SpindleTotal Bobbin=(3*3) =9| CAPACITY:10 KGTOTAL POWER: 6 KWWORKING MEDIUM (WATER): 80 Lit. DATE : 2006. 11MFG. NO. : 2006-CH-10-3MODEL : TGCH-10BODY OPER. PRESSURE : 4 KG/cm? MAXIMUM WORKING TEMP. : 140 °CHEATER OPER. PRESSURE: S/T4/10KG/cm? MAXIMUM WORKING TEMP. :S/T140 °C/183 °CNDT CLASS : RT 20%TONG WU PRECISION MACHINERY CO. LTD TAIWAN| 05. | CH-15/1| Spindle No. :044 Bobbin / SpindleTotal Bobbin=(4*4) =16| CAPACITY:15 KGM/C NO. : CAS-50L-4SER. NO. : 24009627CERT. NO. YKG 930003/4YEAR BUILT: 1999DESIGN CODE: BS55001997CAT2DESIGN PRESSURE: 660 KPaDESIGN TEMPERATURE : 140 °CHYDRAULIC TEST PRESSURE: 1020 KPaTEST DATE : 1999SAFETY VALVE SET : 660 KPaTESTED BY LLYOYDS REGISTER Fongs| 06. | CH-15/2| Spindle No. :035 Bobbin / SpindleTotal Bobbin=(5*3) =15| CAPACITY:15 KGSTOTAL POWER:7 KWWORKING MEDIUM (WATER):120Lit. DATE : 2005. 4MFG. NO. : 2005-CH-15-2MODEL : TGCH-15BODY OPER. PRESSURE : 4 KG/cm? MAXIMUM WORKING TEMP. : 140 °CHEATER OPER. PRESSURE: S/T4/10KG/cm? MAXIMUM WORKING TEMP. :S/T140 °C/183 °CNDT CLASS : RT 20%TONG WU PRECISION MACHINERY CO.LTD TAIWAN| 08 . | CH-30/1| Spindle No. :057 Bobbin / SpindleTotal Bobbin=(5*7) =35| CAPACITY:30 KGSTOTAL POWER:9 KWWORKING MEDIUM (WATER):240Lit. DATE :1995-4MFG. NO. : 951-CH-30-1MODEL : TGCH-30BODY OPER. PRESSURE : 4 KG/cm? HEATER OPER. PRESSURE: 5 KG/cm? TEST PRESSURE : 8KG/cm? MAXIMUM WORKING TEMP. :140 °C TONG WU PRECISION MACHINERY CO. LTD TAIWAN| 09. | CH-30/2| Spindle No. :057 Bobbin / SpindleTotal Bobbin=(5*7) =35| CAPACITY: 30 KGSTOTAL POWER: 9 KWWORKING MEDIUM (WATER):240Lit.DATE :1995-4MFG. NO. : 951-CH-30-1MODEL : TGCH-30BODY OPER. PRESSURE : 4 KG/cm? HEATER OPER. PRESSURE: 5KG/cm? TEST PRESSURE : 8KG/cm? MAXIMUM WORKING TEMP. :140 °C TONG WU PRECISION MACHINERY CO. LTD TAIWAN| 10. | CH-50/1| Spindle No. :087 Bobbin / SpindleTotal Bobbin=(8*7) =56| CAPACITY: 50 KGSTOTAL POWER: 12 KWWORKING MEDIUM (WATER):400Lit. DATE :1995-4MFG. NO. : 951-CH-50-2MODEL : TGCH-50BODY OPER. PRESSURE : 4 KG/cm? HEATER OPER. PRESSURE: 5 KG/cm? TEST PRESSURE : 8KG/cm?MAXIMUM WORKINGTEMP. : 140 °C TON G WU PRECISION MACHINERY CO. LTD TAIWAN| 11. | CH-50/2| Spindle No. :087 Bobbin / SpindleTotal Bobbin=(8*7) =56| CAPACITY: 50 KGSTOTAL POWER: 12 KWWORKING MEDIUM (WATER):400Lit. DATE :1995-4MFG. NO. : 951-CH-50-2MODEL : TGCH-50BODY OPER. PRESSURE : 4KG/cm? HEATER OPER. PRESSURE: 5 KG/cm? TEST PRESSURE : 8 KG/cm? MAXIMUM WORKING TEMP. : 140 °C TONG WU PRECISION MACHINERY CO. LTD TAIWAN| 12. | CH-100/1| Spindle No. 167 Bobbin / SpindleTotal Bobbin=(16*7) =112| CAPACITY: 100 KGSTOTAL POWER: 21 KWWORKING MEDIUM (WATER):800Lit. DATE : 1995-6MFG. NO. : 951-CH-100MODEL : TGCH-100BODY OPER. PRESSURE : 4 KG/cm? HEATER OPER. PRESSURE: 5 KG/cm? TEST PRESSURE : 8 KG/cm? MAXIMUM WORKING TEMP. :140 °C TONG WU PRECISION MACHINERY CO. LTD TAIWAN| 13. | CH-100/2| Spindle No. :167 Bobbin / SpindleTotal Bobbin=(16*7) =112| CAPACITY:100 KGSTOTAL POWER:21 KWWORKING MEDIUM (WATER):800Lit. DATE :1995-6MFG. NO. : 951-CH-100MODEL : TGCH-100BODY OPER.PRESSURE : 4 KG/cm? HEATER OPER. PRESSURE: 5 KG/cm? TE ST PRESSURE : 8 KG/cm? MAXIMUM WORKING TEMP. :140 °C TONG WU PRECISION MACHINERY CO. LTD TAIWAN| 14. | CH-200/1| Spindle No. :327 Bobbin / SpindleTotal Bobbin=(32*7) =224| CAPACITY: 200 KGSTOTAL POWER: 32 KWWORKING MEDIUM (WATER):2000Lit. DATE :1993. 3MFG. NO. : 921-CH-200-10MODEL : TGCH-200KGBODY OPER. PRESSURE : 4 KG/cm? HEATER OPER. PRESSURE: 5 KG/cm? TEST PRESSURE : 8 KG/cm? MAXIMUM WORKING TEMP. :140 °C TONG WU PRECISION MACHINERY CO.LTD TAIWAN | 15. | CH-200/2| Spindle No. :327 Bobbin / SpindleTotal Bobbin=(32*7) =224| CAPACITY: 200 KGSTOTAL POWER: 32 KWWORKING MEDIUM (WATER):2000Lit. DATE :1993. 3MFG. NO. : 921-CH-200-10MODEL : TGCH-200KGBODY OPER. PRESSURE : 4 KG/cm? HEATER OPER. PRESSURE: 5 KG/cm? TEST PRESSURE : 8 KG/cm? MAXIMUM WORKING TEMP. :140 °C TONG WU PRECIS